Paragon Alcon Big Brake Kit Front Mono6 08-17 Audi A5/S5

Rating: Not Rated Yet
Paragon Alcon Big Brake Kit Front Mono6 Available in 355mm (14") or 380mm x 32mm (15" x 1.25") - 08-17 Audi A5/S5. Features Alcon's award winning MonoBloc calipers with a semi-floating rotor design by Paragon. Direct bolt-on without any modifications. Designed to work flawlessly with OEM ABS and brake master cylinder.
InStockUS-Partner.gif
  • Manufacturer: Paragon-Alcon
  • SKU: PBK.50.070.xxx.320.TL.01.0x.Px.F
Your Price:
$ 2,850.00

Select rotor diameter for BBK

Description

Information

Paragon Alcon Big Brake Kit (Front Mono 6  - Audi A5/S5 (B8)

 

Alcon Paragon brake kits provide superior braking performance and come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials/components were used to ensure the brake kit to perform and last under both street and track conditions. Alcon's experience in top level motorsport including NASCAR, F1, and WRC further enhanced the exceptional performance of this brake kit.

 

  • Features Alcon CAR97 Monobloc 6 piston calipers
  • Paragon 355mm (14in) and  380x32mm (15in) floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors
  • Direct bolt-on without any modifications. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes
  • Designed to provide shorter brake distance and less brake fade, while offering optimum bite, better modulation, thermal stability, and durability
  • Rotor to hat mounting system: Floating T-Bobbin (12 bolt)
  • Complete pre-assembled axle set

 

Includes:

  • One pair of Alcon CAR97 Monobloc 6 piston calipers
  • One pair of Paragon 355mm (14in) or 380x32mm (15" x 1.25" ”)  2-piece rotor assemblies with black/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips 
  • One set of performance brake pads - your choice of compound.
  • Caliper mounting brackets and all necessary hardware
  • Goodridge DOT approved stainless steel braided brake lines

 

 

 

Application:

  • 2008-2017 Audi A5 (B8/B8.5) Front
  • 2008-2016 Audi S5 (B8/B8.5) Front

 

Cali

alcon-car97-calipers-paragon-performance-d.jpg

  • Lightweight single-piece aluminium Mono-bloc design for optimum strength
  • Staggered piston bore sizes for improved brake balance and even pad wear
  • High stiffness (firm pedal)
  • Pin-mounted pads provide low threshold pressure and minimize unwanted noises 
  • Features dust seals to improve durability and protection against debris / road salt

 

 

paragon-alcon-bbk-2.jpg

Rotors

  • Floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads
  • Superior braking and cooling efficiency
  • Features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking
  • Made of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability
  • Heat treated to release stress in the rotor to avoid deformation and vibration
  • State-of-the-art CBN surface machining to ensure better break-in with new brake pads
  • Excellent thermal capacity to minimize brake fade

Curved Directional Ventilation Vanes

Features 48 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.

directional-ventilation-vanes-paragon-performance.jpg

paragon-alcon-car97-bbk-slotted-disc.jpg

Slotted Friction Face

Slotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.

 

 

Aluminum Hats

  • CNC machined from lightweight 6061-T6 aerospace grade aluminum
  • Unsprung weight reduction
  • High strength and durability
  • Black/hard anodized to increase resistance to wear and corrosion

black-hard-anodized-aluminum-hats-1.jpg

Floating Bobbins & Mounting System

Utilizes T-Bobbin rotor to hat mounting system to allow "float" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.

t-bobbin-floating-disc-paragon-performance.jpg

t-bobbin-rotor-attachment-kit-paragon-performance.jpg

Caliper Mounting Brackets

CNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.

caliper-mounting-brackets-paragon-performance.jpg

Paragon Brake Pads

  • Manufactured by Winmax Japan
  • Superior stopping power and modulation
  • High fade resistance
  • Consistent performance under high temperature conditions
  • Compounds available for street, street / track, and dedicated track applications

>MORE INFO

pbp1332-brake-pads-paragon-performance-nl.jpg

Goodridge Stainless Steel Braided Brake Lines

  • Superior durability. Abrasion and corrosion resistant
  • Allows more responsive and firmer pedal feel
  • DOT / TÜV certified

goodridge-stainless-steel-braided-brake-lines-paragon-performance.jpg

OEM Fitment & Functionality

  • Direct bolt-on without any modifications
  • Properly sized piston and pad volume. Designed to work flawlessly with OEM ABS and brake master cylinder while maintaining proper brake bias
  • Compatible with OEM rear brakes

 

Wheel Fitment

 

***Check fit using the wheel template before purchase.  All brake kits are assembled to order and cannot be returned due to wheel fitment issues.

355mm Wheel Fitment Template Download (please select the appropriate PDF with correct paper size): Letter size A4  

How to use the wheel fitment template (PDF)

**355mm brake kits generally require 18" or larger wheels, but fitment varies due to different specs / wheel design. Verify fitment with wheel fitment template.

 

380MM Wheel Fitment Template Download (please select the appropriate PDF with correct paper size): Letter size / A4  

How to use the wheel fitment template (PDF)

**380mm brake kits generally require 19" or larger wheels, but fitment varies due to different specs / wheel design. Verify fitment with wheel fitment template.

 

About the A5 S5

The Audi A5 is a series of compact executive coupe cars produced by the German automobile manufacturer Audi since June 2007. The A5 range additionally comprises the coupe, cabriolet, and "Sportback" (a five-door liftback with a fastback roofline) version of the Audi A4 saloon and estate models.

Under Audi's internal platform numbering convention, the A5 is a member of the B-platform series of vehicles, sharing its platform designation with the A4 saloon and Avant. The first generation A5 (Type 8T) is therefore a member of the B8 family, whilst the second generation model (Type 8W6) is based on the B9.[1] Both are derived from the Volkswagen MLB (Modular Longitudinal Matrix) architecture.

Initial release

When presented at the March 2007 Geneva Motor Show, the A5 marked Audi's return to the compact executive coupé market since the (B3/B4) Audi 80 based coupé model ended production in 1996. On May 10, 2006, Audi confirmed that the A5 would go into production. The B6/B7 A4 spawned a convertible variant but not a coupé. For the fourth-generation A4 (B8), Audi decided to spin off the cabriolet, along with a new coupé and 4-door fastback sedan, into a nameplate of its own as the A5.

The A5 was the first of the B8 family of vehicles to be released (the others being the A4 and the Q5 crossover SUV), all based on the Audi MLP platform (Modular Longitudinal Platform) which underpin the next generation A6 and A8.[4]

The A5 is the third coupé in Audi's line up, following the second generation TT and the R8. The A5 adopted design elements of the Nuvolari quattro concept car. The A5 debuted with the 3.2 litre FSI V6 engine delivering 195 kW (265 PS; 261 hp).

Paragon BBK Parameters

Reviews

There are yet no reviews for this product.