Paragon Alcon Big Brake Kit Front Mono6 09-16 Audi A4/S4

Rating: Not Rated Yet
Paragon Alcon Big Brake Kit Front Mono6 355mm (14in) or 380mm x 32mm (15" x 1.25") - 09-16 Audi A4/S4. Features Alcon's award winning MonoBloc calipers with a semi-floating rotor design by Paragon. Direct bolt-on without any modifications. Designed to work flawlessly with OEM ABS and brake master cylinder.
InStockUS-Partner.gif
  • Manufacturer: Paragon-Alcon
  • SKU: PBK.50.070.xxx.320.TL.01.0x.Px.F
Your Price:
$ 2,850.00

Select rotor diameter for BBK

Description

Information

Paragon Alcon Big Brake Kit Front Mono 6 - Audi A4/S4 (B8)

 

Alcon Paragon brake kits provide superior braking performance and come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials/components were used to ensure the brake kit to perform and last under both street and track conditions. Alcon's experience in top level motorsport including NASCAR, F1, and WRC further enhanced the exceptional performance of this brake kit.

 

  • Features Alcon CAR97 Monobloc 6 piston calipers
  • Paragon 355mm x 32mm (14.0" x 1.25") or  380x32mm (15" x 1.25" ”) floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors
  • Direct bolt-on without any modifications. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes
  • Designed to provide shorter brake distance and less brake fade, while offering optimum bite, better modulation, thermal stability, and durability
  • Rotor to hat mounting system: Floating T-Bobbin (12 bolt)
  • Complete pre-assembled axle set

 

Includes:

  • One pair of Alcon CAR97 Monobloc 6 piston calipers
  • One pair of Paragon 355mm x 32mm (14.0" x 1.25") or 380x32mm (15" x 1.25" ”)  2-piece rotor assemblies with black/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips 
  • One set of performance brake pads - your choice of compound.
  • Caliper mounting brackets and all necessary hardware
  • Goodridge DOT approved stainless steel braided brake lines

 

 

Application: 

  • 2009-2016 Audi A4 (B8/B8.5) Front
  • 2010-2016 Audi S4 (B8/B8.5) Front

 

 

Cali

alcon-car97-calipers-paragon-performance-d.jpg

  • Lightweight single-piece aluminium Mono-bloc design for optimum strength
  • Staggered piston bore sizes for improved brake balance and even pad wear
  • High stiffness (firm pedal)
  • Pin-mounted pads provide low threshold pressure and minimize unwanted noises 
  • Features dust seals to improve durability and protection against debris / road salt

 

 

paragon-alcon-bbk-2.jpg

Rotors

  • Floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads
  • Superior braking and cooling efficiency
  • Features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking
  • Made of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability
  • Heat treated to release stress in the rotor to avoid deformation and vibration
  • State-of-the-art CBN surface machining to ensure better break-in with new brake pads
  • Excellent thermal capacity to minimize brake fade

Curved Directional Ventilation Vanes

Features 48 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.

directional-ventilation-vanes-paragon-performance.jpg

paragon-alcon-car97-bbk-slotted-disc.jpg

Slotted Friction Face

Slotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.

 

 

Aluminum Hats

  • CNC machined from lightweight 6061-T6 aerospace grade aluminum
  • Unsprung weight reduction
  • High strength and durability
  • Black/hard anodized to increase resistance to wear and corrosion

black-hard-anodized-aluminum-hats-1.jpg

Floating Bobbins & Mounting System

Utilizes T-Bobbin rotor to hat mounting system to allow "float" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.

t-bobbin-floating-disc-paragon-performance.jpg

t-bobbin-rotor-attachment-kit-paragon-performance.jpg

Caliper Mounting Brackets

CNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.

caliper-mounting-brackets-paragon-performance.jpg

Paragon Brake Pads

  • Manufactured by Winmax Japan
  • Superior stopping power and modulation
  • High fade resistance
  • Consistent performance under high temperature conditions
  • Compounds available for street, street / track, and dedicated track applications

>MORE INFO

pbp1332-brake-pads-paragon-performance-nl.jpg

Goodridge Stainless Steel Braided Brake Lines

  • Superior durability. Abrasion and corrosion resistant
  • Allows more responsive and firmer pedal feel
  • DOT / TÜV certified

goodridge-stainless-steel-braided-brake-lines-paragon-performance.jpg

OEM Fitment & Functionality

  • Direct bolt-on without any modifications
  • Properly sized piston and pad volume. Designed to work flawlessly with OEM ABS and brake master cylinder while maintaining proper brake bias
  • Compatible with OEM rear brakes

 

Wheel Fitment

 

***Check fit using the wheel template before purchase.  All brake kits are assembled to order and cannot be returned due to wheel fitment issues.

380mm Wheel Fitment Template Download (please select the appropriate PDF with correct paper size): Letter size / A4  

How to use the wheel fitment template (PDF)

 **380mm brake kits generally require 19" or larger wheels, but fitment varies due to different specs / wheel design. Verify fitment with wheel fitment template.

355mm Wheel Fitment Template Download (please select the appropriate PDF with correct paper size): Letter size / A4  

How to use the wheel fitment template (PDF)

**355mm brake kits generally require 18" or larger wheels, but fitment varies due to different specs / wheel design. Verify fitment with wheel fitment template.

 

About the A4 S4

 

The Audi A4 is a line of compact executive cars produced since 1994 by the German car manufacturer Audi, a subsidiary of the Volkswagen Group.

The A4 has been built in five generations and is based on the Volkswagen Group B platform. The first generation A4 succeeded the Audi 80. The automaker's internal numbering treats the A4 as a continuation of the Audi 80 lineage, with the initial A4 designated as the B5-series, followed by the B6, B7, B8, and the B9. The B8 and B9 versions of the A4 are built on the Volkswagen Group MLB platform shared with many other Audi models and potentially one Porsche model within Volkswagen Group.[2]

The Audi A4 automobile layout consists of a front-engine design, with transaxle-type transmissions mounted at the rear of the engine. The cars are front-wheel drive, or on some models, "quattro" all-wheel drive.

The A4 is available as a sedan and station wagon. Historically, the second (B6) and third generations (B7) of the A4 also included a convertible version. For the fourth generation (B8) and onwards, the convertible, along with a new coupé and 5-door liftback variant, was spun-off by Audi into a new nameplate called the Audi A5.

 

Paragon BBK Parameters

Reviews

There are yet no reviews for this product.