{"title":"Audi Brake Upgrades","description":"\u003cp\u003eWhen it comes to upgrading your Audi's braking system, Alcon brake kits are among the most celebrated names, offering race-proven performance with street-ready refinement. Exclusive to AlconKits.com, the Audi collection features carefully curated Big Brake Kits—including the high-performance Paragon Alcon and Mono 6 piston setups—designed to drastically improve braking power, thermal stability, and modulation for both daily driving and the track. These kits are engineered for direct bolt-on use and compatibility with OEM systems, making them an intelligent choice for serious Audi drivers aiming for maximum performance with minimal fuss.\u003c\/p\u003e","products":[{"product_id":"paragon-competition-big-brake-kit-pa035-6-piston-audi-c7-a6-s6-a7-s7-d4-a8-front","title":"Paragon Competition Big Brakes (PA035 6 piston) - Audi C7 A6\/S6\/A7\/S7\/Q5\/SQ5 \/ D4 A8 Front","description":"\u003cp\u003eParagon Track Performance Big Brake Kit (PA035 6 piston) - Audi C7 A6\/S6\/A7\/S7 \/ D4 A8 Front - 378mm or 410mm rotors\u003cbr\u003e\u003cbr\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e{tab=Information}\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eParagon Track Performance Big Brake Kit (PA035 6 piston) - Audi C7 A6\/S6\/A7\/S7 \/ D4 A8 Front\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFully-floating 2-piece rotors, with 72 directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePiston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eRecommended usage: Street \/ Track\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eComplete pre-assembled axle set\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: large;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon 72 vane fully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of Paragon P3 “Street\/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of caliper anti rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e2012-Present Audi A6\/S6 (C7) Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e2011-2018 Audi A7\/S7 (C7) Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e2011-2017 Audi A8 (D4) Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eKit Number:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.05.070.378.360.TL.01.02.Px.F (378x36mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.05.070.410.360.TL.01.02.Px.F (410x36mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight single-piece aluminium Mono-bloc design for optimum strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eHigh stiffness (firm pedal)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePin-mounted pads provide low threshold pressure and minimize unwanted noises\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures dust seals to improve durability and protection against debris \/ road salt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003ePA035 6 Piston Calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pa015-6-piston-caliper-paragon-performance-pd-1.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/pa015-6-piston-caliper-paragon-performance-pd-1.jpg?v=1696971068\" alt=\"Paragon PA015 track performance 6 piston brake caliper\" width=\"1000\" height=\"785\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from billet 6061-T6 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOutstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness\/modulation characteristics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eTitanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg class=\"__mce_add_custom__\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/tin-coated-stainless-steel-pistons-paragon-performance-pd-2.jpg?v=1696971070?t=1645685980\u0026amp;_gl=1*1e72a6p*_ga*MjEwNDkxOTA3NC4xNjQ0NzU0Njg2*_ga_WS2VZYPC6G*MTY0NTY4MjMwNS41My4xLjE2NDU2ODU1MjEuMTg.\" alt=\"TiN coated stainless steel brake caliper pistons\" width=\"1000\" height=\"712\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris\/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cimg class=\"__mce_add_custom__\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/high-temp-seals-installed-in-brake-caliper-paragon-performance-pd-1.jpg?v=1696971073?t=1645685426\u0026amp;_gl=1*vkf6eq*_ga*MjEwNDkxOTA3NC4xNjQ0NzU0Njg2*_ga_WS2VZYPC6G*MTY0NTY4MjMwNS41My4xLjE2NDU2ODQwMzcuMjM.\" alt=\"High temp seals installed in Paragon PA015 6 piston brake caliper\" width=\"1000\" height=\"857\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized finish for improved wear resistance. Unlike painted\/powder coated calipers, hard anodized finish will not deteriorate under extreme heat\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStrong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOptional anti-knockback springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel bleed screws and crossover pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEach caliper is pressure tested to guarantee proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating 2-piece Rotors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003e\u003cimg class=\"__mce_add_custom__\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/pa015-6-piston-big-brake-kit-paragon-performance-pd-1.jpg?v=1696971076?t=1645692212\u0026amp;_gl=1*bzbp3y*_ga*MjEwNDkxOTA3NC4xNjQ0NzU0Njg2*_ga_WS2VZYPC6G*MTY0NTY5MDc5OC41NC4xLjE2NDU2OTA4NDQuMTQ.\" alt=\"Paragon 6 piston calipers and floating 2-piece brake rotors\" width=\"1000\" height=\"563\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCurved Directional Ventilation Vanes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"directional-ventilation-vanes-paragon-performance.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/directional-ventilation-vanes-paragon-performance_9d19de08-da65-4da3-8f2a-b6f2c831f5fc.jpg?v=1696971046\" alt=\"directional-ventilation-vanes-paragon-performance.jpg\" width=\"850\" height=\"447\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eSlotted Friction Face\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"paragon-alcon-car97-bbk-slotted-disc.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/paragon-alcon-car97-bbk-slotted-disc_fdc84fef-d6be-4a8b-be96-a2d4caef33fc.jpg?v=1696971049\" alt=\"paragon-alcon-car97-bbk-slotted-disc.jpg\" width=\"800\" height=\"437\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eHard Anodized Aluminum Hats\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cimg class=\"__mce_add_custom__\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/hard-anodized-rotor-hat-pd-1.jpg?v=1696971079?t=1645693492\u0026amp;_gl=1*5yfv6o*_ga*MjEwNDkxOTA3NC4xNjQ0NzU0Njg2*_ga_WS2VZYPC6G*MTY0NTY5MDc5OC41NC4xLjE2NDU2OTI5MzkuNjA.\" alt=\"\" width=\"500\" height=\"381\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating Bobbins \u0026amp; Mounting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"t-bobbin-floating-disc-paragon-performance.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/t-bobbin-floating-disc-paragon-performance_1f974319-2326-454d-ab49-643165c15a59.jpg?v=1696971053\" alt=\"t-bobbin-floating-disc-paragon-performance.jpg\" width=\"900\" height=\"463\"\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"t-bobbin-rotor-attachment-kit-paragon-performance.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/t-bobbin-rotor-attachment-kit-paragon-performance_39bdcd0e-b0b0-4585-9454-4fb24a5d6c64.jpg?v=1696971056\" alt=\"t-bobbin-rotor-attachment-kit-paragon-performance.jpg\" width=\"650\" height=\"249\"\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCaliper Mounting Brackets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"caliper-mounting-brackets-paragon-performance.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/caliper-mounting-brackets-paragon-performance_5fe9adfc-fe8a-413c-b167-b0ca070f39ae.jpg?v=1696971059\" alt=\"caliper-mounting-brackets-paragon-performance.jpg\" width=\"650\" height=\"426\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eParagon Brake Pads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003ePA035 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cimg class=\"__mce_add_custom__\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/pbp819-brake-pads-paragon-bbk-1.jpg?v=1696971082?t=1645699499\u0026amp;_gl=1*10r4fss*_ga*MjEwNDkxOTA3NC4xNjQ0NzU0Njg2*_ga_WS2VZYPC6G*MTY0NTY5MDc5OC41NC4xLjE2NDU2OTY1NDEuMTk.\" alt=\"\" width=\"750\" height=\"273\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eGoodridge Stainless Steel Braided Brake Lines\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"goodridge-stainless-steel-braided-brake-lines-paragon-performance.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/goodridge-stainless-steel-braided-brake-lines-paragon-performance_f0928029-75cf-488b-abaa-aab6786151dd.jpg?v=1696971062\" alt=\"goodridge-stainless-steel-braided-brake-lines-paragon-performance.jpg\" width=\"750\" height=\"465\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e{tab=Wheel Fitment}\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWheel Fitment Template Download (PDF):\u003c\/strong\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PA035_20378x36mm_20Wheel_20Fitment_20Template_20-_20Audi_20C7_20A6_20S6_20A7_20S7_20_20D4_20A8_20Front.pdf?v=1696971084\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e378x36mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e \/ \u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PA035_20410x36mm_20Wheel_20Fitment_20Template_20-_20Audi_20C7_20A6_20S6_20A7_20S7_20D4_20A8_20Front.pdf?v=1696971087\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e410x36mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt;\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/big-brake-kit-wheel-fitment-guide.pdf?v=1696969886\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to use the wheel fitment template (PDF)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large; color: #000000;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e**378mm brake kits generally require 18\"\/19\" or larger wheels, while 410mm brake kits generally require 20\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"line-height: 15.808px;\"\u003e{tab=Installation Guide}\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e{\/tabs}\u003c\/p\u003e\n\u003cp\u003eSKU: PBK.05.070.378-410.360.TL.01.02.Px.F -01\u003c\/p\u003e","brand":"Paragon-Alcon","offers":[{"title":"P2 Street \/ 410mm (16.1 in) (72 vane)","offer_id":47388057895220,"sku":"PBK.05.070.378-410.360.TL.01.02.Px.F -01","price":3050.0,"currency_code":"USD","in_stock":true},{"title":"P2 Street \/ 378mm (15.0 in) (72 vane)","offer_id":47388057927988,"sku":"PBK.05.070.378-410.360.TL.01.02.Px.F -02","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"P3 Sport \/ 410mm (16.1 in) (72 vane)","offer_id":47388057960756,"sku":"PBK.05.070.378-410.360.TL.01.02.Px.F -03","price":3095.0,"currency_code":"USD","in_stock":true},{"title":"P3 Sport \/ 378mm (15.0 in) (72 vane)","offer_id":47388057993524,"sku":"PBK.05.070.378-410.360.TL.01.02.Px.F -04","price":2995.0,"currency_code":"USD","in_stock":true},{"title":"R5 Med Track \/ 410mm (16.1 in) (72 vane)","offer_id":47388058026292,"sku":"PBK.05.070.378-410.360.TL.01.02.Px.F -05","price":3155.0,"currency_code":"USD","in_stock":true},{"title":"R5 Med Track \/ 378mm (15.0 in) (72 vane)","offer_id":47388058059060,"sku":"PBK.05.070.378-410.360.TL.01.02.Px.F -06","price":3055.0,"currency_code":"USD","in_stock":true},{"title":"R7 Hi Temp Track \/ 410mm (16.1 in) (72 vane)","offer_id":47388058091828,"sku":"PBK.05.070.378-410.360.TL.01.02.Px.F -07","price":3235.0,"currency_code":"USD","in_stock":true},{"title":"R7 Hi Temp Track \/ 378mm (15.0 in) (72 vane)","offer_id":47388058124596,"sku":"PBK.05.070.378-410.360.TL.01.02.Px.F -08","price":3135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Paragon-Big-Brake-Kit-380mm_223af435-b3c9-4557-9d13-d43f8aea5f58.jpg?v=1699632086"},{"product_id":"performance-floating-rotors-front-pair-340mm-x-30mm-13-39-x-1-18-audi-s3-8v-8v-5","title":"Audi S3 (8V \/ 8V.5) and VW Mk7\/8 Performance 2 Piece Rotors - (Front) 340mm x 30mm (13.39\" x 1.18\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-vw-and-audi-mqb-mqb-evo-front-pair\"\u003ePRK.010.340.300.19100.08.03.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) \u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003e2015-2020 \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eGolf R \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eMk7\/Mk7.5 \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e2.0 TSI\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003e2015-2020 Golf GTI \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eMk7\/Mk7.5 \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e2.0T Gen3 \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e(\u003c\/span\u003e\u003cspan style=\"font-size: medium; text-decoration-line: underline;\"\u003ePerformance Pack PP only\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003e2022+ Golf GTI Mk8 \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e2.0T Gen4\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003e2015-2020 S3 8V\/8V.5 \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e2.0 TFSI\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003e2017-2021 \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eSQ2 2.0T\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your \u003ca href=\"https:\/\/alconkits.com\/search?q=Audi+S3\" title=\"Audi\"\u003eAudi S3's \u003c\/a\u003eperformance with our OE replacement rotors. These front pair 340mm x 30mm rotors provide improved braking power (feature) for a smoother and safer ride (benefit). Elevate your driving experience with our top-quality Audi S3 rotors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor to hat mounting system: D-Bobbin (Long), 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eWeighs 17.97 lbs (8.15 kg) - \u003cspan\u003evs. OEM 23.5 lbs (reduce 5.5 lbs of unsprung weight on each rotor)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e\u003cspan\u003e OEM part number 5Q0615301G \/ 1K0615301AD\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 340mm x 30mm (13.39” x 1.18\") 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-006f5087-7fff-b39b-09eb-19a170774bc3\"\u003ePart # (w\/ black hard anodized hat): \u003cspan\u003eP2R.010.340.300.19100.08.03.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-7e201e13-7fff-d381-379e-9f78a8aedade\"\u003ePart # (w\/ hard anodized hat): \u003cspan\u003eP2R.010.340.300.19100.08.03.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 340mm (13.39\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 30mm (1.18\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 28mm (1.10\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 17.97 lbs (8.15 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 5Q0615301G \/ 1K0615301AD\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eBrembo 09.C306.11\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEBC SG2FC1877 \/ GD1877 \/ D1877\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/Stoptech 121.33144 \/ 125.33144 \/ 320.33144\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A1-171\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 2830E\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050440601908,"sku":"P2R.010.340.300.19100.08.03.01.F","price":950.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050440634676,"sku":"P2R.010.340.300.19100.08.03.02.F","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/S38V-Rotor-Front-2__13627_225daf29-dc47-41f0-915e-983d020d6ccc.jpg?v=1726844746"},{"product_id":"performance-floating-rotors-front-pair-345mm-x-30mm-13-58-x-1-18-audi-b8-b8-5-s4-s5","title":"Audi B8\/B8.5 S4\/S5 Performance 2 Piece Rotors - (Front) 345mm x 30mm (13.58\" x 1.18\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-b8-b8-5-s4-s5-q5-front-pair\"\u003ePRK.122.345.300.19100.08.03.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi B8\/B8.5 S4\/S5\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eEnhance your driving experience with our Performance OE Replacement Rotors for Audi B8\/B8.5 S4\/S5. These front rotors measure 345mm x 30mm (13.58\" x 1.18\") and are designed to improve braking performance and durability. Upgrade your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e and feel the difference on the road!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFloating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: D-Bobbin (Long) - 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e \u003cspan\u003eOEM Audi part # \u003c\/span\u003e\u003cspan\u003e4G0 615 301 AE\u003c\/span\u003e\u003cspan\u003e \/ 4G0 615 301 AF \/ 8K0 615 301 M\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eApplication:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- 2010-2017 B8 \/ B8.5 S4\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- \u003cspan\u003e2008-2012 B8 S5\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e- 2013-2017 B8.5 S5\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 345mm x 30mm (13.58\" x 1.18\") 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): P2R.122.345.300.19100.08.03.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): P2R.122.345.300.19100.08.03.02.F\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 345mm (13.58\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 30mm (1.18\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 28mm (1.10\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 4G0615301 \/ 4G0615301AE \/ 4G0615301G \/ 4G0615301M\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eBrembo 09.C170.11 \/ 09.B970.1X\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A1-130\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/StopTech \u003cspan class=\"f-rbt\"\u003e125.33138\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"f-rbt\" style=\"font-size: medium;\"\u003eDBA 2832E \/ 52832W\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"f-rbt\" style=\"font-size: medium;\"\u003eEBC GD1844 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050440995124,"sku":"P2R.122.345.300.19100.08.03.01.F","price":950.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050441027892,"sku":"P2R.122.345.300.19100.08.03.02.F","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG_OEM_Rotor_c344de6e-e1aa-46bc-9f84-966d4880b917.jpg?v=1720121414"},{"product_id":"performance-floating-rotors-front-pair-350mm-x-34mm-13-78-x-1-34-audi-b9-b9-5-s4-s5-sq5","title":"Audi B9\/B9.5 S4\/S5\/SQ5 Performance 2 Piece Rotors - (Front) 350mm x 34mm (13.78\" x 1.34\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-b9-b9-5-s4-s5-sq5-front-pair\"\u003ePRK.132.350.340.18300.08.03.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi B9\/B9.5 S4\/S5\/SQ5\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your\u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003e Audi\u003c\/a\u003e's braking performance with our Performance OE Replacement Rotors! Measuring 350mm x 34mm (13.78\" x 1.34\"), these rotors are designed specifically for the B9\/B9.5 S4\/S5\/SQ5 models. Take on the road with confidence and control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFloating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\"\u003eRotor to hat mounting system: D-Bobbin (Long) - 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e \u003cspan\u003eOEM Audi part # 4M0 615 301 AB \/ 4M0 615 301 AN\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eApplication:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- 2018+ B9 \/ B9.5 S4\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- 2018+ B9 \/ B9.5 S5\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e- 2018+ B9 \/ B9.5 SQ5\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 350mm x 34mm (13.78\" x 1.34\") 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): P2R.132.350.340.18300.08.03.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\"\u003ePart # (w\/ hard anodized hat): P2R.132.350.340.18300.08.03.02.F\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 350mm (13.78\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 34mm (1.34\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 4M0615301AB \/ 4M0615301AN\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050444730676,"sku":"P2R.132.350.340.18300.08.03.01.F","price":950.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050444763444,"sku":"P2R.132.350.340.18300.08.03.02.F","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG_OEM_Rotor_6a393e84-ad23-4c10-a24f-4f1437b7e1ab.jpg?v=1720121504"},{"product_id":"performance-floating-rotors-front-pair-365mm-x-34mm-14-37-x-1-34-audi-r8-mk1-type-42","title":"Audi R8 Mk1 (Type 42) Performance 2 Piece Rotors - (Front) 365mm x 34mm (14.37\" x 1.34\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs6-c5-front-pair\"\u003ePRK.002.365.340.23000.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi R8 Mk1 (Type 42)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eExperience unmatched performance with our Performance OE Replacement Rotors for your \u003ca href=\"https:\/\/alconkits.com\/search?q=audi\"\u003eAudi R8\u003c\/a\u003e Mk1 (Type 42). These front pair rotors measure 365mm x 34mm, providing superior stopping power and precision. Upgrade your Audi R8's performance and ride with confidence.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The fully-floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # 420615301A \/ 420615301B \/ 420615301D \/ 4S0615301B \/ 8T0615301\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e\u003cstrong\u003e** For vehicles with OEM steel brakes only\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e***Please refer to the following guide for vehicle specific installation instructions: \u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/R8-Mk1-RS4-B8-RS5-B8-LP570-365x34mm-2-pc-Front-Rotors-Installation-Guide-Paragon-Performance.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003ePDF download\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 365mm x 34mm (14.37” x 1.34”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan\u003eP2R.002.365.340.23000.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-userformat=\"{\" data-sheets-value=\"{\" roman=\"\" new=\"\"\u003eP2R.002.365.340.23000.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 365mm (14.37\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 34mm (1.34\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 420615301A \/ 420615301B \/ 420615301D \/ 4S0615301B \/ 8T0615301\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEBC SG2F009\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/Stoptech 128.33122 \/ 228.33122\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 52834 \/ 52834W\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050447548724,"sku":"P2R.002.365.340.23000.05.01.01.F","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050447581492,"sku":"P2R.002.365.340.23000.05.01.02.F","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Audi-R8-Mk1-2-pc-Front-Rotors-Paragon-Performance-1__40162.jpg?v=1726845140"},{"product_id":"performance-floating-rotors-front-pair-365mm-x-34mm-14-37-x-1-34-audi-rs4-b8-8k","title":"Audi RS4 B8 (8K) Performance 2 Piece Rotors - (Front) 365mm x 34mm (14.37\" x 1.34\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs4-b8-8k-front-pair\"\u003ePRK.054.365.340.23000.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi RS4 B8 (8K)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your driving experience with Performance OE Replacement Rotors for \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e RS4 B8 (8K). Boost your Audi's performance with these 365mm x 34mm (14.37\" x 1.34\") rotors. Feel the rush of bold, daring driving as you push your limits on the road.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating \u003c\/span\u003e2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors \u003cspan id=\"docs-internal-guid-5522788d-7fff-cc6a-9ede-fd3856289c0d\"\u003e\u003cspan\u003ewhile maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e\u003cspan\u003e OEM Audi part # 420615301A \/ 420615301B \/ 420615301D \/ \u003c\/span\u003e\u003cspan\u003e4S0615301B \/ \u003c\/span\u003e\u003cspan\u003e8T0615301\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e***Please refer to the following guide for vehicle specific installation instructions: \u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/R8-Mk1-RS4-B8-RS5-B8-LP570-365x34mm-2-pc-Front-Rotors-Installation-Guide-Paragon-Performance.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003ePDF download\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 365mm x 34mm (14.37” x 1.34”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan\u003eP2R.054.365.340.23000.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.054.365.340.23000.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 365mm (14.37\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 34mm (1.34\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 420615301A \/ 420615301B \/ 420615301D \/ 4S0615301B \/ 8T0615301\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEBC SG2F009\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/Stoptech 128.33122 \/ 228.33122\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 52834 \/ 52834W\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050447614260,"sku":"P2R.054.365.340.23000.05.01.01.F","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050447647028,"sku":"P2R.054.365.340.23000.05.01.02.F","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Audi-RS4-B8-2-pc-Front-Rotors-Paragon-Performance-1__65060_494bf784-e5e8-4e27-839f-706c66c43966.jpg?v=1726845146"},{"product_id":"performance-floating-rotors-front-pair-365mm-x-34mm-14-37-x-1-34-audi-rs5-b8-8t","title":"Audi RS5 B8 (8T) Performance 2 Piece Rotors - (Front) 365mm x 34mm (14.37\" x 1.34\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs5-b8-8t-front-pair\"\u003ePRK.003.365.340.23000.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi RS5 B8 (8T)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your\u003ca href=\"https:\/\/alconkits.com\/search?q=audi\"\u003e Audi RS5 B8\u003c\/a\u003e (8T) with our Performance OE Replacement Rotors for enhanced braking power. These front pair rotors measure 365mm x 34mm and are designed to provide superior performance and durability. Elevate your driving experience and enjoy increased control on the road with our premium rotors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e\u003cspan\u003e OEM Audi part # 420615301A \/ 420615301B \/ 420615301D \/ \u003c\/span\u003e\u003cspan\u003e4S0615301B \/ \u003c\/span\u003e\u003cspan\u003e8T0615301\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e***Please refer to the following guide for vehicle specific installation instructions: \u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/R8-Mk1-RS4-B8-RS5-B8-LP570-365x34mm-2-pc-Front-Rotors-Installation-Guide-Paragon-Performance.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003ePDF download\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 365mm x 34mm (14.37” x 1.34”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.003.365.340.23000.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.003.365.340.23000.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 365mm (14.37\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 34mm (1.34\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 420615301A \/ 420615301B \/ 420615301D \/ 4S0615301B \/ 8T0615301\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEBC SG2F009\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/Stoptech 128.33122 \/ 228.33122\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 52834 \/ 52834W\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050449252660,"sku":"P2R.003.365.340.23000.05.01.01.F","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050449285428,"sku":"P2R.003.365.340.23000.05.01.02.F","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Audi-RS5-B8-8T-2-pc-Front-Rotors-Paragon-Performance-1__34761_fd1ad34d-4a03-4d44-896c-c5825d0a0eb0.jpg?v=1726845153"},{"product_id":"performance-floating-rotors-front-pair-365mm-x-34mm-14-37-x-1-34-audi-rs6-c5","title":"Audi RS6 (C5) Performance 2 Piece Rotors - (Front) 365mm x 34mm (14.37\" x 1.34\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs6-c5-front-pair\"\u003ePRK.002.365.340.23000.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi RS6 (C5 \/ Typ 4B)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e RS6 (C5) with our bold Performance OE Replacement Rotors. With a 365mm x 34mm size, these front pair rotors provide exceptional braking power for your daring driving style. Take on any challenge with confidence in your Audi's performance!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The fully-floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # \u003cspan\u003e4B3615301E \/ \u003cspan\u003e4B3615302A\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e***Please refer to the following guide for vehicle specific installation instructions: \u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/R8-Mk1-RS4-B8-RS5-B8-LP570-365x34mm-2-pc-Front-Rotors-Installation-Guide-Paragon-Performance.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003ePDF download\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 365mm x 34mm (14.37” x 1.34”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan\u003eP2R.002.365.340.23000.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.002.365.340.23000.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 365mm (14.37\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 34mm (1.34\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 420615301A \/ 420615301B \/ 420615301D \/ 4S0615301B \/ 8T0615301\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEBC SG2F009\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/Stoptech 128.33122 \/ 228.33122\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 52834 \/ 52834W\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050449383732,"sku":"P2R.002.365.340.23000.05.01.01.F","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050449416500,"sku":"P2R.002.365.340.23000.05.01.02.F","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Audi-R8-Mk1-2-pc-Front-Rotors-Paragon-Performance-1__40162_3d61c03e-3c2a-4435-a33b-266c3efda8fa.jpg?v=1726845159"},{"product_id":"performance-floating-rotors-front-pair-370mm-x-32mm-14-57-x-1-26-audi-rs3-8p","title":"Audi RS3 (8P) Performance 2 Piece Rotors - (Front) 370mm x 32mm (14.57\" x 1.26\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs3-8p-tt-rs-8j-front-pair\"\u003ePRK.004.370.320.22100.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" tt=\"\" rs=\"\" new=\"\" roman=\"\"\u003eRS3 (8P)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your\u003ca href=\"https:\/\/alconkits.com\/search?q=audi\"\u003e Audi RS3's\u003c\/a\u003e performance with our front pair 370mm x 32mm rotors! Experience improved braking, better heat dissipation, and a sleek look. Enjoy the thrill of a smoother and more efficient ride with these high-quality replacement rotors.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eWeighs 23.74 lbs (10.77 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # 8P0615301C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 370mm x 32mm (14.57” x 1.26”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.004.370.320.22100.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.004.370.320.22100.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 370mm (14.57\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 32mm (1.26\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 30mm (1.18\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): \u003cspan\u003e23.74 lbs (10.77 kg)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 8P0615301C\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050449776948,"sku":"P2R.004.370.320.22100.05.01.01.F","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050449809716,"sku":"P2R.004.370.320.22100.05.01.02.F","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/RS3-8P-2-piece-brake-disc-0415-T__42657_113ffd0e-b9dd-4f46-9b52-ddd83a3c3a5b.jpg?v=1726845183"},{"product_id":"performance-floating-rotors-front-pair-370mm-x-32mm-14-57-x-1-26-audi-tt-rs-8j","title":"Audi TT RS (8J) Performance 2 Piece Rotors - (Front) 370mm x 32mm (14.57\" x 1.26\")","description":"\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi TT RS (8J) Mk2\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eTransform your \u003ca href=\"https:\/\/alconkits.com\/search?q=Audi+TT\"\u003eAudi TT \u003c\/a\u003eRS (8J) with these Performance OE Replacement Rotors! With a size of 370mm x 32mm (14.57\" x 1.26\"), they provide powerful braking capabilities for the ultimate driving experience. Upgrade your brakes today and enhance your vehicle's performance on the road.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors \u003cspan id=\"docs-internal-guid-c068a867-7fff-5da7-28f7-de03fcb628ab\"\u003e\u003cspan\u003ewhile maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eWeighs 23.74 lbs (10.77 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # 8J0615301K \/ 8J0615301E \/ 8J0615301F\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 370mm x 32mm (14.57” x 1.26”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.005.370.320.22100.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.005.370.320.22100.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 370mm (14.57\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 32mm (1.26\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 30mm (1.18\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): \u003cspan\u003e23.74 lbs (10.77 kg)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi \u003cspan\u003e8J0615301K \/ 8J0615301E \/ 8J0615301F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A1-152\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050449908020,"sku":"P2R.005.370.320.22100.05.01.01.F","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050449940788,"sku":"P2R.005.370.320.22100.05.01.02.F","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Audi-TT-RS-8J-2-pc-front-brake-rotors-Paragon-Performance-1-T__80079_321132dd-5ebd-4e3d-b4c4-279f0ae5040a.jpg?v=1726845189"},{"product_id":"performance-floating-rotors-front-pair-370mm-x-34mm-14-57-x-1-34-audi-rs3-8v-8v-5-sedan","title":"Audi RS3 8V \/ 8V.5 (Sedan) Performance 2 Piece Rotors - (Front) 370mm x 34mm (14.57\" x 1.34\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs3-8v-8v-5-sedan-front-pair\"\u003ePRK.006.370.340.23500.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" tt=\"\" rs=\"\" new=\"\" roman=\"\"\u003eRS3 8V \/ 8V.5 (Sedan)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi \u003c\/a\u003ewith Performance OE Replacement Rotors! Experience improved braking power and precision with these 370mm x 34mm (14.57\" x 1.34\") front rotors designed specifically for the Audi RS3 8V\/8V.5 sedan. Dominate the road with bold confidence and superior performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eWeighs 22.75 lbs (10.32 kg) - vs. OEM 26.9 lbs (4.15 lbs weight reduction per rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-de3fa9a0-7fff-daa6-b41e-6a3590ba6c43\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003e***Fit RS3 (8V \/ 8V.5) Sedan only. \u003cspan\u003eWILL NOT\u003c\/span\u003e fit RS3 (8V) Sportback \/ TT RS (8S)***\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eDirect replacement of:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003e OEM Audi part # 8V0615301R \/ 8V0615301Q\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 370mm x 34mm (14.57” x 1.34”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-dac1eb17-7fff-5fde-8acf-d474f9eb12bd\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.006.370.340.23500.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-bdfbcbeb-7fff-7c19-70a7-bce53946c100\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.006.370.340.23500.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 370mm (14.57\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 34mm (1.34\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 22.75 lbs (10.32 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 8V0615301R \/ 8V0615301Q\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A1-180\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050449973556,"sku":"P2R.006.370.340.23500.05.01.01.F","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050450006324,"sku":"P2R.006.370.340.23500.05.01.02.F","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Audi-RS3-8V-Sedan-2-pc-front-brake-rotors-Paragon-Performance-1-T__14939_50131f3d-1c62-4499-95cf-6802bd377c24.jpg?v=1726845195"},{"product_id":"performance-floating-rotors-front-pair-370mm-x-34mm-14-57-x-1-34-audi-rs3-8v-8v-5-sportback","title":"Audi RS3 8V \/ 8V.5 (Sportback) Performance 2 Piece Rotors - (Front) 370mm x 34mm (14.57\" x 1.34\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs3-8v-8v-5-sportback-front-pair\"\u003ePRK.146.370.340.23500.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" tt=\"\" rs=\"\" new=\"\" roman=\"\"\u003eRS3 8V \/ 8V.5 (Sportback)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e RS3 with our Performance OE Replacement Rotors! These front rotors are 370mm x 34mm (14.57\" x 1.34\") and are designed to provide maximum performance and reliability on the track or on the street. Take your driving to the next level with improved braking power and precision.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-de3fa9a0-7fff-daa6-b41e-6a3590ba6c43\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003e***Fit RS3 (8V \/ 8V.5) Sportback only. \u003cspan\u003eWILL NOT\u003c\/span\u003e fit RS3 (8V) Sedan\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eDirect replacement of:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003e OEM Audi part # 8V0615301S \/ \u003cspan\u003e8V0615301P\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 370mm x 34mm (14.57” x 1.34”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-dac1eb17-7fff-5fde-8acf-d474f9eb12bd\"\u003ePart # (w\/ black hard anodized hat): \u003cspan\u003e\u003cspan\u003eP2R.146.370.340.23500.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-bdfbcbeb-7fff-7c19-70a7-bce53946c100\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003e\u003cspan\u003eP2R.146.370.340.23500.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 370mm (14.57\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 34mm (1.34\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 72\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi \u003cspan\u003e8V0615301S \/ \u003c\/span\u003e\u003cspan\u003e8V0615301P\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A1-191\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050450039092,"sku":"P2R.146.370.340.23500.05.01.01.F","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050450071860,"sku":"P2R.146.370.340.23500.05.01.02.F","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG_OEM_Rotor_4b26c8ad-49de-458e-b639-02a77bb1cb81.jpg?v=1720121738"},{"product_id":"performance-floating-rotors-front-pair-370mm-x-34mm-14-57-x-1-34-audi-tt-rs-8s","title":"Audi TT RS (8S) Performance 2 Piece Rotors - (Front) 370mm x 34mm (14.57\" x 1.34\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-tt-rs-8s-front-pair\"\u003ePRK.007.370.340.23500.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi TT RS 8S Mk3\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003ePush your track and race experience to new limits with the Paragon Performance 2-piece Rotor for your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e TT RS Mk3. This rotor's directional ventilation vanes create suction and turbulence to direct cool air and optimize heat dissipation, keeping cracking at bay under even the most intense track conditions. Drive with superior braking and cooling efficiency, without fear of overheating or loss of performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-de3fa9a0-7fff-daa6-b41e-6a3590ba6c43\"\u003eRotor to hat mounting system: H-Bobbin (10 bolts)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eWeighs 21.8 lbs (9.89 kg)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eDirect replacement of:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003e OEM Audi part # 8S0615301E \/ 8S0615301L\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 370mm x 34mm (14.57” x 1.34”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-dac1eb17-7fff-5fde-8acf-d474f9eb12bd\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.007.370.340.23500.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-bdfbcbeb-7fff-7c19-70a7-bce53946c100\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.007.370.340.23500.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 370mm (14.57\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 34mm (1.34\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 72\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 21.8 lbs (9.89 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 8S0615301E \/ 8S0615301L\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A1-179\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050450104628,"sku":"P2R.007.370.340.23500.05.01.01.F","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050450137396,"sku":"P2R.007.370.340.23500.05.01.02.F","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/TT-RS-8S-2-pc-Front-Rotors-Paragon-Performance-1__14166_4181393e-2906-4dec-9a4f-532786e03c45.jpg?v=1726845208"},{"product_id":"performance-floating-rotors-front-pair-375mm-x-36mm-14-76-x-1-42-audi-rs5-b9-b9-5","title":"Audi RS5 B9 \/ B9.5 Performance 2 Piece Rotors - (Front) 375mm x 36mm (14.76\" x 1.42\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs4-rs5-b9-b9-5-front-pair\"\u003ePRK.147.375.360.21200.08.01.F\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi RS5 B9 \/ B9.5\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eBoost your\u003ca href=\"https:\/\/alconkits.com\/search?q=audi\"\u003e Audi RS5\u003c\/a\u003e's braking power with our Performance OE Replacement Rotors! These 375mm x 36mm rotors (14.76\" x 1.42\") are specifically designed for the RS5 B9\/B9.5 model, ensuring a perfect fit and enhanced performance. Upgrade your driving experience with improved braking control and responsiveness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFloating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eWeighs 27.60 lbs (12.52 kg)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: D-Bobbin (Long) - 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # 4M0 615 301 AM\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 375mm x 36mm (14.76” x 1.42”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): P2R.147.375.360.21200.08.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): P2R.147.375.360.21200.08.01.02.F\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 375mm (14.76\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 36mm (1.42\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 34mm (1.34\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eWeight (per rotor): 27.60 lbs (12.52 kg)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi \u003cspan\u003e4M0615301AM\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A1-216\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFitment:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2018+ Audi RS4 B9\/B9.5 2.9 TFSI\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2018+ Audi RS5 B9\/B9.5 2.9 TFSI\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2015+ Audi Q7 4M\/4M.5 2.0 TFSI\/3.0 TFSI\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2018+ Audi Q8 4M8 3.0 TFSI\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\n\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\n\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\n\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\n\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\n\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\n\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\n\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\n\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\n\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\n\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050452103476,"sku":"P2R.147.375.360.21200.08.01.01.F","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050452136244,"sku":"P2R.147.375.360.21200.08.01.02.F","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/RS5-B9-B9.5-2-piece-front-brake-rotor-paragon-performance-1__66302_62af9e96-d971-414c-83d6-40633cef303b.jpg?v=1726845232"},{"product_id":"performance-floating-rotors-front-pair-378mm-x-33mm-14-88-x-1-30-audi-rs-3-lms-gen-ii","title":"Audi RS 3 LMS gen II Performance 2 Piece Rotors - (Front) 378mm x 33mm (14.88\" x 1.30\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-378x33mm-replacement-rotors-for-audi-rs-3-lms-gen-ii-front-pair\"\u003ePRK.193.378.330.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi RS 3 LMS gen II\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eRev up your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e RS 3 LMS gen II with our Performance OE Replacement Rotors. Measuring 378mm x 33mm (14.88\" x 1.30\"), these front pair rotors offer precision and durability to enhance your driving experience. Upgrade your vehicle and conquer any road with confidence!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e72 Directional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Audi RS 3 LMS gen 2 car\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 378mm x 33mm (14.88” x 1.30”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, and stainless steel bobbins (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-f06cc7cc-7fff-23c9-bad1-1d38efb7fda8\"\u003ePart # (w\/ black hard anodized hat): P2R.193.378.330.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-20dbc453-7fff-4b77-a1ac-57ed4e99b39f\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): P2R.193.378.330.01.02.F\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions.\u003c\/span\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 378mm (14.88\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 33mm (1.30\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 31mm (1.22\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 72\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050452201780,"sku":"P2R.193.378.330.01.01.F","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050452234548,"sku":"P2R.193.378.330.01.02.F","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG_OEM_Rotor_c9c12b61-cefa-4998-9c74-38ae85fbb2a1.jpg?v=1720121773"},{"product_id":"performance-floating-rotors-front-pair-380mm-x-34mm-14-96-x-1-34-vw-golf-r-mk8-audi-s3-8y-larger-rotor","title":"VW Golf R Mk8 \/ Audi S3 (8Y) - Larger Rotor Performance 2 Piece Rotors - (Front) 380mm x 34mm (14.96\" x 1.34\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-vw-golf-r-mk8-audi-s3-8y-larger-rotor-front-pair\"\u003ePRK.196.380.340.21500.08.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for \u003cspan\u003eVolkswagen\u003c\/span\u003e Golf R Mk8 \/ Audi S3 (8Y) - Larger Rotor\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eIncrease your \u003ca href=\"https:\/\/alconkits.com\/search?q=Volkswagen\"\u003eVW\u003c\/a\u003e Golf R or Audi S3 performance with our Performance OE Replacement Rotors! Designed specifically for the Volkswagen Golf R Mk8 and Audi S3, these rotors are larger and more durable for an improved driving experience. Upgrade now and feel the power of your vehicle with every turn.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor to hat mounting system: D-Bobbin (Long), 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM part number 5WA615301A\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eApplications: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e2022-Present VW Golf R Mk8 Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2022-Present Audi S3 (8Y) Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 380mm x 34mm (14.96\" x 1.34\") 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eOne pair CNC machined steel caliper carriers (red \/ blue)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-3e6fc962-7fff-64c6-949a-f77d17e2a4d3\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-userformat=\"{\" data-sheets-value=\"{\" roman=\"\" new=\"\"\u003eP2R.196.380.340.21500.08.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-d56788e7-7fff-87ac-4634-b178a23ae9c4\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-userformat=\"{\" data-sheets-value=\"{\" roman=\"\" new=\"\"\u003eP2R.196.380.340.21500.08.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 380mm (14.96\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 34mm (1.34\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM VW\/Audi 5WA615301A\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050452758836,"sku":"P2R.196.380.340.21500.08.01.01.F","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050452791604,"sku":"P2R.196.380.340.21500.08.01.02.F","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PGRotor_b5270858-1820-4b87-971b-1610488b9cba.jpg?v=1726845280"},{"product_id":"performance-floating-rotors-front-pair-390mm-x-36mm-15-35-x-1-42-audi-c7-rs6-c7-rs7","title":"Audi C7 RS6 \/ C7 RS7 Performance 2 Piece Rotors - (Front) 390mm x 36mm (15.35\" x 1.42\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-c7-rs6-c7-rs7-front-pair\"\u003ePRK.177.390.360.22400.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi C7 RS6 \/ C7 RS7\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eRev up your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e with the C7 RS6\/C7 RS7 Performance OE Replacement Rotors. These front pair rotors, measuring 390mm x 36mm, provide top-notch performance and a bold look. Upgrade your driving experience and conquer the road with confident, risk-taking style.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The fully-floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # \u003cspan\u003e4G0615301E \/ \u003c\/span\u003e\u003cspan\u003e4G0615301AH\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 390mm x 36mm (15.35” x 1.42”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\"\u003eP2R.177.390.360.22400.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\"\u003eP2R.177.390.360.22400.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 390mm (15.35\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 36mm (1.42\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 34mm (1.34\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOEM Audi\u003c\/strong\u003e 4G0615301E \/ 4G0615301AH\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eEBC\u003c\/strong\u003e D2P014\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eGirodisc\u003c\/strong\u003e \u003cspan\u003eA1-190\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e\u003cstrong\u003eDBA\u003c\/strong\u003e 53002\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/StopTech \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003e128.33152\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDixcel\u003c\/strong\u003e 1308431\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050453381428,"sku":"P2R.177.390.360.22400.05.01.01.F","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050453414196,"sku":"P2R.177.390.360.22400.05.01.02.F","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG_OEM_Rotor_db582d7b-61ad-4205-bc31-39c9ff8ecd6d.jpg?v=1720121844"},{"product_id":"performance-floating-rotors-front-pair-400mm-x-38mm-15-75-x-1-50-audi-c7-s6-c7-s7-d4-s8","title":"Audi C7 S6 \/ C7 S7 \/ D4 S8 Performance 2 Piece Rotors - (Front) 400mm x 38mm (15.75\" x 1.50\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-c7-s6-c7-s7-d4-s8-front-pair\"\u003ePRK.109.400.380.22700.05.01.F\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Front Pair) for Audi C7 S6 \/ C7 S7 \/ D4 S8\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eElevate your driving experience with Performance OE Replacement Rotors. Crafted specifically for \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e C7 S6\/S7 and D4 S8, these rotors deliver unparalleled performance and long-lasting durability. Measuring at 400mm x 38mm (15.75\" x 1.50\"), they will transform your vehicle's braking system into an unstoppable force.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The fully-floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (10 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eEach rotor assembly weighs 32.4 lbs (14.7 kg) - save 0.9 lb of unsprung weight per rotor vs. OEM\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # \u003cspan\u003e4H0615301AL \/ \u003cspan\u003e4H0615301T \/ \u003cspan\u003e4H0615301M\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e*\u003c\/strong\u003e\u003cspan\u003eFor models with OEM 400mm iron brakes\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 400mm x 38mm (15.75” x 1.50”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\"\u003eP2R.109.400.380.22700.05.01.01.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\"\u003eP2R.109.400.380.22700.05.01.02.F\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 400mm (15.75\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 38mm (1.50\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 32mm (1.26\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 32.4\u003cspan\u003e lbs (14.70 kg)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi \u003cspan\u003e\u003cspan\u003e\u003cspan\u003e4H0615301M \/ 4H0615301T \/ 4H0615301AL\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc \u003cspan\u003eA1-187\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050454200628,"sku":"P2R.109.400.380.22700.05.01.01.F","price":1300.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050454233396,"sku":"P2R.109.400.380.22700.05.01.02.F","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/C7-S6-C7-S7-D4-S8-400x38mm-2-pc-front-brake-rotor-disc-paragon-performance-1__45111_d41b54a0-66ba-4cf0-98fa-c38dd7cf3a8c.jpg?v=1726845375"},{"product_id":"performance-floating-rotors-rear-pair-300mm-x-12mm-11-81-x-0-47-audi-b8-q5","title":"Audi B8 Q5 Performance 2 Piece Rotors - (Rear) 300mm x 12mm (11.81\" x 0.47\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-b8-q5-rear-pair\"\u003ePRK.117.300.120.17880.07.03.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eParagon 2-piece Rotors Rear Pair 300mm x 12mm (11.81\" x 0.47\") - Audi B8 Q5\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMaximize your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e's potential with our Performance OE Replacement Rotors! Designed specifically for the Audi B8 Q5, these 300mm x 12mm rotors provide superior braking power and durability. Upgrade your ride today and experience the smooth and efficient performance that only Audi can deliver!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e6cd1da6-7fff-2888-5766-300349b7571c\"\u003eRotor to hat mounting system: D-Bobbin (short) - 8 bolt\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e \u003cspan\u003eOEM Audi part # \u003cspan\u003e8K0615601B \/ \u003cspan\u003e8K0615601J \/ \u003cspan\u003e8K0615601M\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cspan\u003e 2009-2017 Audi B8 Q5\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 300mm x 12mm (11.81” x 0.47”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-7f5cc5b6-7fff-523f-a978-a470773b4bec\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003e\u003cspan\u003eP2R.117.300.120.17880.07.03.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-4f06d93d-7fff-7ee6-6acc-1627aa9197a2\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003e\u003cspan\u003eP2R.117.300.120.17880.07.03.02.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 300mm (11.81\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 12mm (0.47\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 10mm (0.39\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Solid\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: N\/A\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi part # 8K0615601B \/ 8K0615601J \/ 8K0615601M\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050454724916,"sku":"P2R.117.300.120.17880.07.03.01.R","price":850.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050454757684,"sku":"P2R.117.300.120.17880.07.03.02.R","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG_OEM_Rotor_958daeac-f74a-4447-a7b7-2d0d9877bcb1.jpg?v=1720121920"},{"product_id":"performance-floating-rotors-rear-pair-330mm-x-22mm-12-99-x-0-87-audi-b8-b8-5-s4-s5","title":"Audi B8\/B8.5 S4\/S5 Performance 2 Piece Rotors - (Rear) 330mm x 22mm (12.99\" x 0.87\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-b8-b8-5-s4-s5-q5-sq5-rear-pair\"\u003ePRK.122.330.220.20300.08.03.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for Audi B8\/B8.5 S4\/S5\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e B8\/B8.5 S4\/S5 with a pair of Performance OE Replacement Rotors, measuring 330mm x 22mm (12.99\" x 0.87\"). Enhance your driving experience with superior brake performance, ensuring maximum control and precision during any adventure. Take on any challenge with confidence and precision.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFloating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\"\u003eRotor to hat mounting system: D-Bobbin (Short) - 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eWeights 12.2 lbs (5.53 kg)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # 4H0615601Q \/ 4H0615601D \/ 4H0615601H\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eApplication:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- 2010-2017 B8 \/ B8.5 S4\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- 2008-2012 B8 S5\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- 2013-2017 B8.5 S5\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 330mm x 22mm (12.99\" x 0.87\") 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): P2R.122.330.220.20300.08.03.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\"\u003ePart # (w\/ hard anodized hat): P2R.122.330.220.20300.08.03.02.R\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 330mm (12.99\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 22mm (0.87\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 20mm (0.79\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 12.2 lbs (5.53 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 4H0615601Q \/ 4H0615601D \/ 4H0615601H\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eBrembo \u003cspan\u003e09.B969.11\u003c\/span\u003e \/ \u003cspan\u003e09.B040.11 \/ \u003cspan\u003e09.B040.1X\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc \u003cspan\u003eA2-130\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/StopTech 125.33137\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" class=\"f-rbt\"\u003eDBA 2847E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" class=\"f-rbt\"\u003eEBC GD1846\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050455413044,"sku":"P2R.122.330.220.20300.08.03.01.R","price":850.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050455445812,"sku":"P2R.122.330.220.20300.08.03.02.R","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/B8-B8.5-S4-S5-2-piece-rear-brake-rotor-paragon-performance-1__36516_b1499b5a-80b4-4869-82ed-7b64f9a55952.jpg?v=1726845453"},{"product_id":"performance-floating-rotors-rear-pair-330mm-x-22mm-12-99-x-0-87-audi-b9-b9-5-s4-s5-sq5","title":"Audi B9\/B9.5 S4\/S5\/SQ5 Performance 2 Piece Rotors - (Rear) 330mm x 22mm (12.99\" x 0.87\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-b9-b9-5-s4-s5-sq5-rear-pair\"\u003ePRK.132.330.220.20300.08.03.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for 2018+ Audi B9\/B9.5 S4\/S5\/SQ5\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi \u003c\/a\u003eB9\/B9.5's performance with our OE replacement rotors! At 330mm x 22mm, these rear pair rotors provide better braking power for a more thrilling ride. Designed for bold risk-takers, these rotors will elevate your driving experience. Don't settle for less, enhance your Audi's performance with our rotors!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFloating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\"\u003eRotor to hat mounting system: D-Bobbin (Short) - 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eWeights 12.1 lbs (5.49 kg)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # 8W0 615 601 E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eApplication:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- 2018+ B9 \/ B9.5 S4\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- 2018+ B9 \/ B9.5 S5\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e- 2018+ B9 \/ B9.5 SQ5\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 330mm x 22mm (12.99\" x 0.87\") 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): P2R.132.330.220.20300.08.03.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\"\u003ePart # (w\/ hard anodized hat): P2R.132.330.220.20300.08.03.02.R\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 330mm (12.99\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 22mm (0.87\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 20mm (0.79\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 12.1 lbs (5.49 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 8W0615601E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eBrembo \u003cspan\u003e09.B969.11\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eCentric\/StopTech 125.33137\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eEBC PD03KR924\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050455511348,"sku":"P2R.132.330.220.20300.08.03.01.R","price":850.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050455544116,"sku":"P2R.132.330.220.20300.08.03.02.R","price":850.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/B9-B9.5-S4-S5-SQ5-2-piece-rear-brake-rotor-paragon-performance-1__12323_1590b6a3-464e-4db1-b7b2-c129ff4d05e0.jpg?v=1726845459"},{"product_id":"performance-floating-rotors-rear-pair-330mm-x-22mm-12-99-x-0-87-audi-rs5-b8-8t","title":"Audi RS5 B8 (8T) Performance 2 Piece Rotors - (Rear) 330mm x 22mm (12.99\" x 0.87\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs5-b8-8t-rear-pair\"\u003ePRK.003.330.220.20200.13.03.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for Audi RS5 B8 (8T)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eTake on the road with confidence using our Performance OE Replacement Rotors. These high-quality rear pair rotors, measuring at 330mm x 22mm (12.99\" x 0.87\"), are designed specifically for your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi \u003c\/a\u003eRS5 B8 (8T). Upgrade your vehicle's performance and treat yourself to a thrilling driving experience!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efloating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFloating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\"\u003eRotor to hat mounting system: D-Bobbin (Short) - 10 bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e\u003cspan\u003e OEM Audi part # 8T0615601A \/ 8T0-615-601-A\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 330mm x 22mm (12.99” x 0.87”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-userformat=\"{\" data-sheets-value=\"{\"\u003eP2R.003.330.220.20200.13.03.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-userformat=\"{\" data-sheets-value=\"{\"\u003eP2R.003.330.220.20200.13.03.02.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 330mm (12.99\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 22mm (0.87\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 20mm (0.79\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 8T0615601A\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eBrembo 09.B969.11\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A2-149\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 52841\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050455576884,"sku":"P2R.003.330.220.20200.13.03.01.R","price":950.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050455609652,"sku":"P2R.003.330.220.20200.13.03.02.R","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG_OEM_Rotor_5b6bb4f9-4471-4f86-ab21-5d7d72790f30.jpg?v=1720121973"},{"product_id":"performance-floating-rotors-rear-pair-330mm-x-22mm-12-99-x-0-87-audi-rs5-b9-b9-5","title":"Audi RS5 B9 \/ B9.5 Performance 2 Piece Rotors - (Rear) 330mm x 22mm (12.99\" x 0.87\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-rs4-rs5-b9-b9-5-rear-pair\"\u003ePRK.147.330.220.20300.08.03.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for Audi RS5 B9 \/ B9.5\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003ePerformance meets precision with our OE replacement rotors for the \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e RS5 B9 \/ B9.5. Upgrade your braking experience with a pair of rear rotors, measuring 330mm x 22mm (12.99\" x 0.87\"). Conquer the road with confidence and reliability. Ready to take on any challenge? These rotors are for you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFloating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\"\u003eRotor to hat mounting system: D-Bobbin (Short) - 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # 8W0 615 601 G\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 330mm x 22mm (12.99” x 0.87”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodize\u003c\/span\u003e\u003cspan\u003ed 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): P2R.147.330.220.20300.08.03.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\"\u003ePart # (w\/ hard anodized hat): P2R.147.330.220.20300.08.03.02.R\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 330mm (12.99\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 22mm (0.87\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 20mm (0.79\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 8W0615601G\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc \u003cspan\u003eA2-149\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050455642420,"sku":"P2R.147.330.220.20300.08.03.01.R","price":950.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050455675188,"sku":"P2R.147.330.220.20300.08.03.02.R","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG_OEM_Rotor_fc0cd4fa-2a0f-437e-b352-7e6999a07649.jpg?v=1720121978"},{"product_id":"performance-floating-rotors-rear-pair-350mm-x-22mm-13-78-x-0-87-audi-tt-rs-8s-inc-caliper-carrier","title":"Audi TT RS (8S) Inc. Caliper Carrier Performance 2 Piece Rotors - (Rear) 350mm x 22mm (13.78\" x 0.87\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-tt-rs-8s-rear-pair\"\u003ePRK.009.350.220.22200.04.01.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for Audi TT R 8S\u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" tt=\"\" s=\"\" rs=\"\" inc.=\"\" caliper=\"\" carrier=\"\" new=\"\" roman=\"\"\u003e Mk III Inc. Caliper Carrier\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eEnjoy improved braking performance with our Performance OE Replacement Rotors! Made specifically for your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi \u003c\/a\u003eTT RS (8S) vehicles, these rear pair rotors measure 350mm x 22mm (13.78\" x 0.87\") and include a caliper carrier for easy installation. Upgrade your Audi with these high-quality rotors for smoother and more efficient braking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined steel caliper carriers to allow correct spacing with larger rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (8 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eWeighs 14.26 lbs (6.47 kg) - \u003cspan\u003evs. OEM 15.1 lbs (save unsprung weight while utilizing larger rotors)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eLarger rotor size 350mm x 22mm - vs. OEM 310mm x 22mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003e***Fits RS8 (8V), and TT S \/ TT RS (8S)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM part number 1K0615601N \/ 5Q0615601E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 350mm x 22mm (13.78” x 0.87”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of CNC machined steel caliper carriers (red\/black)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-ae49ad2d-7fff-efe6-6afc-f6b7827f9ba8\" style=\"font-size: medium;\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.009.350.220.22200.04.01.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-140f6c7a-7fff-10d1-b829-a690f4888989\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.009.350.220.22200.04.01.02.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 350mm (13.78\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 22mm (0.87\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 20mm (0.79\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 14.26 lbs (6.47 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 1K0615601N \/ 5Q0615601E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eBrembo 09.A200.11 \/ 09.A200.1X\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEBC D1416\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/Stoptech 128.33113L \/ 127.33113R \/ 126.33113SL \/ 126.33113SR\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A2-179\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 2809E\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050457542964,"sku":"P2R.009.350.220.22200.04.01.01.R","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050457575732,"sku":"P2R.009.350.220.22200.04.01.02.R","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Audi-TT-RS-8S-8S.5-2-pc-rear-rotors-Paragon-Performance-1__80342_830f3d24-bce2-4a56-b18f-7d56fede517a.jpg?v=1726845617"},{"product_id":"performance-floating-rotors-rear-pair-350mm-x-22mm-13-78-x-0-87-audi-rs3-8v-8v-5-inc-caliper-carrier","title":"Audi RS3 (8V \/ 8V.5) Inc. Caliper Carrier Performance 2 Piece Rotors - (Rear) 350mm x 22mm (13.78\" x 0.87\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-tt-rs-8s-rear-pair\"\u003ePRK.009.350.220.22200.04.01.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for Audi \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" tt=\"\" s=\"\" rs=\"\" inc.=\"\" caliper=\"\" carrier=\"\" new=\"\" roman=\"\"\u003eRS3 (8V \/ 8V.5) Inc. Caliper Carrier\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e RS3 (8V \/ 8V.5) with our Performance OE Replacement Rotors! These rear rotors are 350mm x 22mm (13.78\" x 0.87\") and include a caliper carrier for easy installation. Improve your car's performance and handling with our high-quality rotors. Drive with confidence and precision.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined steel caliper carriers to allow correct spacing with larger rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (8 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eWeighs 14.26 lbs (6.47 kg) - \u003cspan\u003evs. OEM 15.1 lbs (save unsprung weight while utilizing larger rotors)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eLarger rotor size 350mm x 22mm - vs. OEM 310mm x 22mm\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003e***Fits RS8 (8V), and TT S \/ TT RS (8S\/8S.5)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM part number 1K0615601N \/ 5Q0615601E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 350mm x 22mm (13.78” x 0.87”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of CNC machined steel caliper carriers (red\/black)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-ae49ad2d-7fff-efe6-6afc-f6b7827f9ba8\" style=\"font-size: medium;\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.009.350.220.22200.04.01.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-140f6c7a-7fff-10d1-b829-a690f4888989\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.009.350.220.22200.04.01.02.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 350mm (13.78\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 22mm (0.87\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 20mm (0.79\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 14.26 lbs (6.47 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 1K0615601N \/ 5Q0615601E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eBrembo 09.A200.11 \/ 09.A200.1X\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEBC D1416\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/Stoptech 128.33113L \/ 127.33113R \/ 126.33113SL \/ 126.33113SR\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A2-179\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 2809E\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050457608500,"sku":"P2R.009.350.220.22200.04.01.01.R","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050457641268,"sku":"P2R.009.350.220.22200.04.01.02.R","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Audi-TT-RS-8S-8S.5-2-pc-rear-rotors-Paragon-Performance-1__80342_404ccf68-35c3-48f1-a6a4-f0623262cc08.jpg?v=1726845605"},{"product_id":"performance-floating-rotors-rear-pair-350mm-x-22mm-13-78-x-0-87-audi-s3-8v-8v-5-inc-caliper-carrier","title":"Audi S3 (8V \/ 8V.5) Inc. Caliper Carrier Performance 2 Piece Rotors - (Rear) 350mm x 22mm (13.78\" x 0.87\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-s3-8v-8v-5-rear-pair\"\u003ePRK.010.350.220.22200.04.01.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for Audi S3 (8V \/ 8V.5) Inc. Caliper Carrier\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e S3 (8V \/ 8V.5) braking system with our Performance OE Replacement Rotors. These 350mm x 22mm (13.78\" x 0.87\") rotors include caliper carriers for a complete rear pair. Experience improved braking power and efficiency with these top-of-the-line rotors designed specifically for your Audi.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efully-floating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFully-floating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined steel caliper carriers to allow correct spacing with larger rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor to hat mounting system: H-Bobbin (8 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eWeighs 14.26 lbs (6.47 kg) \u003cspan\u003e- \u003c\/span\u003e\u003cspan\u003evs. OEM 15.1 lbs (save unsprung weight while utilizing larger rotors)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eLarger rotor size 350mm x 22mm - vs. OEM 310mm x 22mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM part number 1K0615601N \/ 5Q0615601E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 350mm x 22mm (13.78” x 0.87”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of CNC machined steel caliper carriers (red\/black)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.010.350.220.22200.04.01.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\" new=\"\" roman=\"\"\u003eP2R.010.350.220.22200.04.01.02.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 350mm (13.78\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 22mm (0.87\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 20mm (0.79\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 14.26 lbs (6.47 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 1K0615601N \/ 5Q0615601E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eBrembo 09.A200.11 \/ 09.A200.1X\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEBC D1416\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/Stoptech 128.33113L \/ 127.33113R \/ 126.33113SL \/ 126.33113SR\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A2-179\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 2809E\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050457706804,"sku":"P2R.010.350.220.22200.04.01.01.R","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050457739572,"sku":"P2R.010.350.220.22200.04.01.02.R","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/Audi-S3-8V-2-pc-rear-rotors-Paragon-Performance-1-T__87194.jpg?v=1722529111"},{"product_id":"performance-floating-rotors-rear-pair-355mm-x-22mm-13-98-x-0-87-vw-golf-r-mk8-audi-s3-8y-larger-rotor","title":"VW Golf R Mk8 \/ Audi S3 (8Y) - Larger Rotor Performance 2 Piece Rotors - (Rear) 355mm x 22mm (13.98\" x 0.87\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-vw-golf-r-mk8-audi-s3-8y-rs3-8y-larger-rotor-rear-pair\"\u003ePRK.196.355.220.23200.08.01.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for \u003cspan\u003eVolkswagen\u003c\/span\u003e Golf R Mk8 \/ Audi S8 (8Y) - Larger Rotor\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUpgrade your braking performance with Performance OE Replacement Rotors, specifically designed for \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Volkswagen%22\"\u003eVW\u003c\/a\u003e Golf R Mk8 and Audi S3 (8Y). These 355mm x 22mm (13.98\" x 0.87\") rotors offer a larger size for improved braking power. Say goodbye to unnecessary vibration and noise, and hello to a smoother, more reliable ride.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor to hat mounting system: D-Bobbin (Short), 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM part number 5Q0615601E\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eApplications: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e2022-Present VW Golf R Mk8 Rear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2022-Present Audi S3 (8Y) Rear\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 355mm x 22mm (13.98\" x 0.87\") 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eOne pair CNC machined steel caliper carriers (red \/ blue)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-3e6fc962-7fff-64c6-949a-f77d17e2a4d3\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-userformat=\"{\" data-sheets-value=\"{\" roman=\"\" new=\"\"\u003eP2R.196.355.220.23200.08.01.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\" id=\"docs-internal-guid-d56788e7-7fff-87ac-4634-b178a23ae9c4\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-userformat=\"{\" data-sheets-value=\"{\" roman=\"\" new=\"\"\u003eP2R.196.355.220.23200.08.01.02.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 355mm (13.98\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 22mm (0.87\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 20mm (0.79\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM VW\/Audi 5Q0615601E\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050458820916,"sku":"P2R.196.355.220.23200.08.01.01.R","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050458853684,"sku":"P2R.196.355.220.23200.08.01.02.R","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG_OEM_Rotor_dab20541-7418-42dd-894f-938115ee97c8.jpg?v=1720122182"},{"product_id":"performance-floating-rotors-rear-pair-356mm-x-22mm-14-02-x-0-87-audi-c7-s6-c7-s7-d4-s8","title":"Audi C7 S6 \/ C7 S7 \/ D4 S8 Performance 2 Piece Rotors - (Rear) 356mm x 22mm (14.02\" x 0.87\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-audi-c7-s6-c7-s7-d4-s8-rear-pair\"\u003ePRK.109.356.220.22200.08.01.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for Audi C7 S6 \/ C7 S7 \/ D4 S8\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eEnhance your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e's performance with these rear rotors, measuring 356mm x 22mm. Upgrade to OE replacement for a powerful ride. Dominate the road with bold action and motion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors\u003cspan id=\"docs-internal-guid-ff1c972e-7fff-da9c-bc7c-5734ccbac6d3\"\u003e\u003cspan\u003e while maintaining proper thermal capacity\u003c\/span\u003e\u003c\/span\u003e, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFloating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-b6904935-7fff-322f-56e4-098aa29968f8\" style=\"font-size: medium;\"\u003eRotor to hat mounting system: D-Bobbin (Short) - 10-bolt\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eEach rotor assembly weighs 13.3 lbs (6.03 kg) - save 6 lbs of unsprung weight per rotor vs. stock units\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e OEM Audi part # 4H0615601F \/ 4H0615601L \/ 4H0615601P\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e*\u003c\/strong\u003e\u003cspan\u003eFor models with OEM 356mm iron brakes\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 356mm x 22mm (14.02” x 0.87”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-8e9a4953-7fff-a07e-8fcb-548eaf289eac\"\u003ePart # (w\/ black hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\"\u003eP2R.109.356.220.22200.08.01.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-d78075ae-7fff-bdf2-a20b-c29e1752eb88\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan data-sheets-value=\"{\" data-sheets-userformat=\"{\"\u003eP2R.109.356.220.22200.08.01.02.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/paragonbrakes.com\/rotor-assembly-instructions\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 356mm (14.02\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 22mm (0.87\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 20mm (0.79\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 36\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 13.3\u003cspan\u003e lbs (6.03 kg)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi \u003cspan\u003e4H0615601F \/ 4H0615601L \/ 4H0615601P\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eBrembo \u003cspan\u003e09.C170.11\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc \u003cspan\u003eA1-187\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050458919220,"sku":"P2R.109.356.220.22200.08.01.01.R","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050458951988,"sku":"P2R.109.356.220.22200.08.01.02.R","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/C7-S6-C7-S7-D4-S8-356x22mm-2-pc-rear-brake-rotor-disc-paragon-performance-1__16292_cf07ec62-168d-419f-a372-5db1afcfe7a8.jpg?v=1726845725"},{"product_id":"performance-floating-rotors-rear-pair-356mm-x-32mm-14-02-x-1-26-audi-r8-mk1-type-42","title":"Audi R8 Mk1 (Type 42) Performance 2 Piece Rotors - (Rear) 356mm x 32mm (14.02\" x 1.26\")","description":"\u003cp\u003e\u003cstrong\u003eReplacement Rotors:\u003c\/strong\u003e \u003ca href=\"https:\/\/alconkits.com\/products\/paragon-replacement-rotors-for-gen-1-and-gen-1-5-audi-r8-4-2-v8-and-5-2-v10-rear-pair\"\u003ePRK.002.356.320.22900.08.01.R\u003c\/a\u003e\u003c\/p\u003e\u003ch1 dir=\"ltr\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eParagon \u003cstrong\u003e2-piece\u003c\/strong\u003e Rotors (Rear Pair) for Audi R8 Mk1 (Type 42)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eRev up your \u003ca href=\"https:\/\/alconkits.com\/search?q=%22Audi%22\"\u003eAudi\u003c\/a\u003e R8's performance with our OE Replacement Rotors! Measuring 356mm x 32mm, these rear pair rotors provide better braking and handling for ultimate driving experience. Take your Audi to the next level with these high-quality, reliable and durable rotors. Upgrade now and feel the difference!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The \u003cspan\u003efloating\u003c\/span\u003e 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than\u003cspan\u003e most\u003c\/span\u003e O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat\/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear\/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: medium;\"\u003e*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDirectional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eFloating\u003c\/span\u003e 2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-9c4476d1-7fff-425f-2f51-13d99bf132c2\"\u003eRotor to hat mounting system: D-Bobbin (Long) - 10 bolt\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eWeighs 17.8 lbs (8.05 kg) - save 2.2 lbs (1 kg) per rotor vs. OEM\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eDirect replacement of:\u003c\/strong\u003e\u003cspan\u003e OEM Audi part # 420615601F \/ 4S0615601B\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eOne pair\u003c\/strong\u003e of Paragon Performance 356mm x 32mm (14.02” x 1.26”) 2-piece \u003cspan\u003erotor assemblies with black hard coat\/hard anodized\u003c\/span\u003e\u003cspan\u003e 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-de062cc7-7fff-267f-9330-55dc0ca96fe7\"\u003ePart # (w\/ black hard anodized hat): \u003cspan\u003eP2R.002.356.320.22900.08.01.01.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan id=\"docs-internal-guid-31b36c62-7fff-4bd4-5995-db988372397c\" style=\"font-size: medium;\"\u003ePart # (w\/ hard anodized hat): \u003cspan\u003eP2R.002.356.320.22900.08.01.02.R\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eExtra\/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/install-tips\/bobbin-installation-instructions\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eRotor Assembly Instructions\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e for torque specs and detailed instructions.\u003c\/span\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDiameter: 356mm (14.02\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (new)\u003c\/span\u003e: 32mm (1.26\")\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003eThickness (min.): 30mm (1.18\")\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eType: 2-piece floating\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFace Pattern: Slotted\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eVented \/ Solid: Directional ventilated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eNumber of Vanes: 48\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eHat Material: 6061-T6 aluminum\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eFriction Ring Material: CM-250 high carbon alloy cast iron\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eRotor Finish: CBN turned\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eWeight (per rotor): 17.8 lbs (8.05 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eCross Reference:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eOEM Audi 420615601F \/ 4S0615601B\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEBC SG2F018\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eGirodisc A2-050\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eCentric\/Stoptech 128.33126 \/ 228.33126\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eDBA 52833\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch4\u003eBest For: Audi and VW Performance Street Cars\u003c\/h4\u003e\u003cp\u003eThese rotors are ideal for Audi and VW owners who want confident fitment, crisp brake response, and better heat management for spirited street driving. They are especially well suited to MQB and other modern VAG performance platforms that see a mix of commuting, backroad driving, and occasional track use.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAre these complete rotors or replacement rings?\u003c\/strong\u003e\u003cbr\u003eThis listing is for a complete 2-piece rotor assembly where specified, with the hats included and the parts assembled ready to install.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these reuse factory hats?\u003c\/strong\u003e\u003cbr\u003eNo. On listings sold as complete Paragon 2-piece rotor assemblies, the rotor hats are included. If your vehicle originally uses a factory 2-piece rotor, some other service-part listings may reuse the OE hats, but this product is sold as a complete assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo slotted rotors improve braking?\u003c\/strong\u003e\u003cbr\u003eSlots primarily improve pad cleaning and help maintain consistent braking feel under heat. They do not create a dramatic change in stopping distance by themselves, but they can help the system stay more consistent during repeated hard stops.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen should rotor rings be replaced?\u003c\/strong\u003e\u003cbr\u003eA practical wear indicator is slot depth. When the slots become shallow and much less visible, the rotor is typically nearing the end of its effective service life. Rotor thickness, heat checking, cracking, and brake vibration should also be inspected during service.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I replace pads at the same time?\u003c\/strong\u003e\u003cbr\u003eYes, in most cases. Fresh pads help the new rotor surface bed in correctly and reduce the chance of uneven deposits, noise, or inconsistent pedal feel.\u003c\/p\u003e\u003ch4\u003eBrake Rotor Technology\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eWhy high-carbon rotors matter\u003c\/strong\u003e\u003cbr\u003eHigh-carbon cast iron offers better thermal stability than generic low-cost rotor materials. That helps the rotor maintain more consistent behavior as temperature rises, which is important on heavier vehicles and on cars driven aggressively.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDirectional vane cooling\u003c\/strong\u003e\u003cbr\u003eDirectional internal vanes are designed to move air through the rotor more effectively, improving heat evacuation and helping the rotor recover more quickly between braking events.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSlotted rotor surface\u003c\/strong\u003e\u003cbr\u003eSlots help keep the pad face clean by clearing away gases, dust, and debris. The result is more consistent pad contact and more repeatable braking feel, especially when the system is worked hard.\u003c\/p\u003e\u003ch4\u003eWhen to Replace Rotor Rings\u003c\/h4\u003e\u003cp\u003eRotor rings should be replaced when the friction surface shows meaningful wear, heat fatigue, or thickness loss. One of the easiest visual indicators is the depth of the rotor slots. As the rotor wears, the slots become shallower. When they are much less visible, the rotor is generally nearing the end of its useful service life.\u003c\/p\u003e\u003cp\u003eOther common signs include visible heat checking or cracking, brake pulsation, heavy scoring, and rotor thickness approaching the service limit.\u003c\/p\u003e\u003ch4\u003eWhy Replace Rotor Rings Instead of the Whole Rotor?\u003c\/h4\u003e\u003cp\u003eThis application uses a 2-piece design because separating the friction ring from the hat improves serviceability, heat management, and weight control. Compared with a heavy one-piece replacement, a quality 2-piece assembly can better suit performance-oriented vehicles where repeated heat cycles matter.\u003c\/p\u003e\u003ch4\u003eCommon Mistakes When Replacing Rotors\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReusing worn pads on a fresh rotor surface\u003c\/li\u003e\n\u003cli\u003eSkipping the pad and rotor bedding process\u003c\/li\u003e\n\u003cli\u003eNot cleaning or inspecting the hat, hardware, and mounting faces\u003c\/li\u003e\n\u003cli\u003eIgnoring brake fluid condition during brake service\u003c\/li\u003e\n\u003cli\u003eOrdering the wrong configuration for the vehicle or hat type\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTaking care of these details helps the new rotor deliver the braking feel, wear life, and consistency it was designed to provide.\u003c\/p\u003e\u003ch4\u003eRecommended Companion Parts\u003c\/h4\u003e\u003cp\u003eRotor service is also a good time to inspect or replace the brake pads, rotor hardware where applicable, and brake fluid. On performance applications, fresh pads and fluid often have as much impact on brake feel as the rotor itself.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed help confirming fitment or choosing the right supporting parts?\u003c\/strong\u003e\u003cbr\u003eOur team specializes in performance brake systems and can help you choose the right combination for your vehicle and how you use it.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Black Hard Anodized","offer_id":48050459083060,"sku":"P2R.002.356.320.22900.08.01.01.R","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"MilSpec Hard Anodized","offer_id":48050459148596,"sku":"P2R.002.356.320.22900.08.01.02.R","price":1050.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/R8-Mk1-2-pc-Rear-Rotors-Paragon-Performance-1__20543.jpg?v=1726845738"},{"product_id":"paragon-track-performance-big-brake-kit-pa015-pa035-6-piston-audi-b8-b8-5-a4-s4-a5-s5-front","title":"Paragon Track Performance Big Brake Kit (PA015 \/ PA035 6 piston) - Audi B8\/B8.5 A4\/S4\/A5\/S5 Front","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eParagon Track Performance Big Brake Kit (PA015 \/ PA035 6 piston) - Audi B8\/B8.5 A4\/S4\/A5\/S5 Front\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures Paragon PA015 \/ PA035 6 piston calipers \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"font-size: small;\"\u003e*Only difference between the PA015 and PA035 calipers is the maximum rotor size they can accommodate\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFully-floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePiston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eRecommended usage: Street \/ Track\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eComplete pre-assembled axle set\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: large;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon PA015 \/ PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon f\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of Paragon P3 “Street\/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of caliper anti rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: large;\"\u003e\u003cstrong\u003e***Please verify wheel fitment \/ clearance before ordering. All Paragon big brake kits are custom made\/packaged to order, and cannot be returned due to wheel fitment issues.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eWheel Fitment Template Download (PDF): \u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA015\/PA015%20355x32mm%20Wheel%20Fitment%20Template%20%28Letter%20Size%29%20-%20Audi%20B8%20B8.5%20A4%20S4%20A5%20S5%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e355x32mm\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20A4%20S4%20A5%20S5%20%28B8%20B8.5%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt;\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eHow to use the wheel fitment template (PDF)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e**\u003cstrong\u003e\u003cspan\u003e355mm brake kits generally require 18\" or larger wheels, while 378mm brake kits generally require 18\"\/19\" or larger wheels. \u003c\/span\u003e\u003c\/strong\u003eFitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e2009-2016 Audi A4\/S4 (B8\/B8.5) Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e2008-2017 Audi A5\/S5 (B8\/B8.5) Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eKit Number:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.02.070.355.320.TL.01.02.Px.F (355x32mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003ePBK.05.070.378.360.TL.01.02.Px.F (378x36mm Rotor)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003ePA015 \/ PA035 6 Piston Calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from billet 6061-T6 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOutstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness\/modulation characteristics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eTitanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris\/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized finish for improved wear resistance. Unlike painted\/powder coated calipers, hard anodized finish will not deteriorate under extreme heat\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStrong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOptional anti-knockback springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel bleed screws and crossover pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEach caliper is pressure tested to guarantee proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating 2-piece Rotors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCurved Directional Ventilation Vanes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eSlotted Friction Face\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eHard Anodized Aluminum Hats\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating Bobbins \u0026amp; Mounting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCaliper Mounting Brackets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eParagon Brake Pads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003e\u003cspan\u003ePA015 \/ PA035 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/brake-pad-info\/winmax-brake-pad-compounds\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e\u0026gt;AVAILABLE PAD COMPOUNDS\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/products\/paragon-pa015-pa035-caliper-brake-pads\" target=\"_blank\"\u003e\u003cspan style=\"font-size: medium; color: #0000ff;\"\u003e \u0026gt;\u003cspan style=\"color: #0000ff;\"\u003eMORE INFO REGARDING THE PAD SHAPE\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eGoodridge Stainless Steel Braided Brake Lines\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- custom tab --\u003e\n\u003ch4 class=\"page-heading\"\u003eWheel Fitment\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWheel Fitment Template Download (PDF): \u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA015\/PA015%20355x32mm%20Wheel%20Fitment%20Template%20%28Letter%20Size%29%20-%20Audi%20B8%20B8.5%20A4%20S4%20A5%20S5%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e355x32mm\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20A4%20S4%20A5%20S5%20%28B8%20B8.5%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt; \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to use the wheel fitment template (PDF)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large; color: #000000;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e**355mm brake kits generally require 18\" or larger wheels, while 378mm brake kits generally require 18\"\/19\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u0026amp;\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Street\/Sport","offer_id":48057670172980,"sku":"PBK.02.070.355.320.TL.01.02.P3.F","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Ceramic","offer_id":48057670140212,"sku":"PBK.02.070.355.320.TL.01.02.P2.F","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057670205748,"sku":"PBK.02.070.355.320.TL.01.02.R5.F","price":2715.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057670238516,"sku":"PBK.02.070.355.320.TL.01.02.R7.F","price":2755.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ P3 Street\/Sport","offer_id":48057670304052,"sku":"PBK.02.070.355.320.TL.02.02.P3.F","price":2850.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ P2 Ceramic","offer_id":48057670271284,"sku":"PBK.02.070.355.320.TL.02.02.P2.F","price":2850.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057670336820,"sku":"PBK.02.070.355.320.TL.02.02.R5.F","price":2915.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057670369588,"sku":"PBK.02.070.355.320.TL.02.02.R7.F","price":2955.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Street\/Sport","offer_id":48057670435124,"sku":"PBK.05.070.378.360.TL.01.02.P3.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Ceramic","offer_id":48057670402356,"sku":"PBK.05.070.378.360.TL.01.02.P2.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057670467892,"sku":"PBK.05.070.378.360.TL.01.02.R5.F","price":3015.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057670500660,"sku":"PBK.05.070.378.360.TL.01.02.R7.F","price":3055.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Street\/Sport","offer_id":48057670566196,"sku":"PBK.05.070.378.360.TL.02.02.P3.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Ceramic","offer_id":48057670533428,"sku":"PBK.05.070.378.360.TL.02.02.P2.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057670598964,"sku":"PBK.05.070.378.360.TL.02.02.R5.F","price":3215.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057670631732,"sku":"PBK.05.070.378.360.TL.02.02.R7.F","price":3255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG6PistonKit_23d28226-4c2e-411d-af53-083f5293fe0c.png?v=1720571583"},{"product_id":"paragon-track-performance-big-brake-kit-pa015-pa035-6-piston-audi-b9-a4-a5-front","title":"Paragon Track Performance Big Brake Kit (PA015 \/ PA035 6 piston) - Audi B9\/B9.5 A4\/S4\/RS4\/A5\/S5\/RS5\/Q5\/SQ5\/Front","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures Paragon PA015 \/ PA035 6 piston calipers \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"font-size: small;\"\u003e*Only difference between the PA015 and PA035 calipers is the maximum rotor size they can accommodate\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFully-floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePiston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eRecommended usage: Street \/ Track\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eComplete pre-assembled axle set\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: large;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon PA015 \/ PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon f\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of Paragon P3 “Street\/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of caliper anti rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: large;\"\u003e\u003cstrong\u003e***Please verify wheel fitment \/ clearance before ordering. All Paragon big brake kits are custom made\/packaged to order, and cannot be returned due to wheel fitment issues.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eWheel Fitment Template Download (PDF): \u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA015\/PA015%20355x32mm%20Wheel%20Fitment%20Template%20%28Letter%20Size%29%20-%20Audi%20A4%20%28B9%29%20A5%20%28B9%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e355x32mm\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20A4%20A5%20%28B9%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt;\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eHow to use the wheel fitment template (PDF)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e**\u003cstrong\u003e\u003cspan\u003e355mm brake kits generally require 18\" or larger wheels, while 378mm brake kits generally require 18\"\/19\" or larger wheels. \u003c\/span\u003e\u003c\/strong\u003eFitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017+ B9\/B9.5 A4 Front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2018+ B9\/B9.5 S4, RS4 Front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2018+ B9\/B9.5 A5, S5, RS5 Front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2018+ B9\/B9.5 Q5, SQ5 Front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2015+ 4M\/4M.5 Q7 Front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e2017+ B9\/B9.5 Allroad Front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eKit Number:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.02.071.355.320.TL.01.02.Px.F (355x32mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003ePBK.05.071.378.360.TL.01.02.Px.F (378x36mm Rotor)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003ePA015 \/ PA035 6 Piston Calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from billet 6061-T6 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOutstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness\/modulation characteristics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eTitanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris\/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized finish for improved wear resistance. Unlike painted\/powder coated calipers, hard anodized finish will not deteriorate under extreme heat\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStrong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOptional anti-knockback springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel bleed screws and crossover pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEach caliper is pressure tested to guarantee proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating 2-piece Rotors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCurved Directional Ventilation Vanes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eSlotted Friction Face\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eHard Anodized Aluminum Hats\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating Bobbins \u0026amp; Mounting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCaliper Mounting Brackets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eParagon Brake Pads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003e\u003cspan\u003ePA015 \/ PA035 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/brake-pad-info\/winmax-brake-pad-compounds\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e\u0026gt;AVAILABLE PAD COMPOUNDS\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/products\/paragon-pa015-pa035-caliper-brake-pads\" target=\"_blank\"\u003e\u003cspan style=\"font-size: medium; color: #0000ff;\"\u003e \u0026gt;\u003cspan style=\"color: #0000ff;\"\u003eMORE INFO REGARDING THE PAD SHAPE\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eGoodridge Stainless Steel Braided Brake Lines\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- custom tab --\u003e\n\u003ch4 class=\"page-heading\"\u003eWheel Fitment\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWheel Fitment Template Download (PDF): \u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA015\/PA015%20355x32mm%20Wheel%20Fitment%20Template%20%28Letter%20Size%29%20-%20Audi%20A4%20%28B9%29%20A5%20%28B9%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e355x32mm\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20A4%20A5%20%28B9%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt; \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to use the wheel fitment template (PDF)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large; color: #000000;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e**355mm brake kits generally require 18\" or larger wheels, while 378mm brake kits generally require 18\"\/19\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u0026amp;\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Street\/Sport","offer_id":48057670730036,"sku":"PBK.02.071.355.320.TL.01.02.P3.F","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Ceramic","offer_id":48057670697268,"sku":"PBK.02.071.355.320.TL.01.02.P2.F","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057670762804,"sku":"PBK.02.071.355.320.TL.01.02.R5.F","price":2715.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057670795572,"sku":"PBK.02.071.355.320.TL.01.02.R7.F","price":2755.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ P3 Street\/Sport","offer_id":48057670861108,"sku":"PBK.02.071.355.320.TL.02.02.P3.F","price":2850.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ P2 Ceramic","offer_id":48057670828340,"sku":"PBK.02.071.355.320.TL.02.02.P2.F","price":2850.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057670893876,"sku":"PBK.02.071.355.320.TL.02.02.R5.F","price":2915.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057670926644,"sku":"PBK.02.071.355.320.TL.02.02.R7.F","price":2955.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Street\/Sport","offer_id":48057670992180,"sku":"PBK.05.071.378.360.TL.01.02.P3.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Ceramic","offer_id":48057670959412,"sku":"PBK.05.071.378.360.TL.01.02.P2.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057671024948,"sku":"PBK.05.071.378.360.TL.01.02.R5.F","price":3015.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057671057716,"sku":"PBK.05.071.378.360.TL.01.02.R7.F","price":3055.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Street\/Sport","offer_id":48057671123252,"sku":"PBK.05.071.378.360.TL.02.02.P3.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Ceramic","offer_id":48057671090484,"sku":"PBK.05.071.378.360.TL.02.02.P2.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057671156020,"sku":"PBK.05.071.378.360.TL.02.02.R5.F","price":3215.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057671188788,"sku":"PBK.05.071.378.360.TL.02.02.R7.F","price":3255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG6PistonKit_7f925198-bd97-4cd1-9636-04eee727d630.png?v=1720571590"},{"product_id":"paragon-track-performance-big-brake-kit-pa015-pa035-6-piston-audi-tt-8n-vw-golf-r32-mk4-front","title":"Paragon Track Performance Big Brake Kit (PA015 \/ PA035 6 piston) - Audi TT (8N) \/ VW Golf R32 Mk4 Front","description":"\u003ch1\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eParagon Track Performance Big Brake Kit (PA015 \/ PA035 6 piston) - Audi TT (8N) \/ VW Golf R32 Mk4 Front\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures Paragon PA015 \/ PA035 6 piston calipers \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"font-size: small;\"\u003e*Only difference between the PA015 and PA035 calipers is the maximum rotor size they can accommodate\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFully-floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePiston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eRecommended usage: Street \/ Track\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eComplete pre-assembled axle set\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: large;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon PA015 \/ PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon f\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of Paragon P3 “Street\/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of caliper anti rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: large;\"\u003e\u003cstrong\u003e***Please verify wheel fitment \/ clearance before ordering. All Paragon big brake kits are custom made\/packaged to order, and cannot be returned due to wheel fitment issues.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eWheel Fitment Template Download (PDF): \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA015\/PA015%20355x32mm%20Wheel%20Fitment%20Template%20-%20Audi%20TT%20%288N%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e355x32mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20TT%20%288N%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt;\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eHow to use the wheel fitment template (PDF)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e**\u003cstrong\u003e\u003cspan\u003e355mm brake kits generally require 18\" or larger wheels, while 378mm brake kits generally require 18\"\/19\" or larger wheels. \u003c\/span\u003e\u003c\/strong\u003eFitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e1998-2006 Audi TT (8N) Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e2010-2018 Audi A1 (8X) Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e2003 Volkswagen Golf R32 Mk4 Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eKit Number:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.02.212.355.320.TL.01.02.Px.F (355x32mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003ePBK.05.212.378.360.TL.01.02.Px.F (378x36mm Rotor)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003ePA015 \/ PA035 6 Piston Calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from billet 6061-T6 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOutstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness\/modulation characteristics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eTitanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris\/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized finish for improved wear resistance. Unlike painted\/powder coated calipers, hard anodized finish will not deteriorate under extreme heat\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStrong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOptional anti-knockback springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel bleed screws and crossover pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEach caliper is pressure tested to guarantee proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating 2-piece Rotors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCurved Directional Ventilation Vanes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eSlotted Friction Face\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eHard Anodized Aluminum Hats\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating Bobbins \u0026amp; Mounting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCaliper Mounting Brackets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eParagon Brake Pads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003e\u003cspan\u003ePA015 \/ PA035 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/brake-pad-info\/winmax-brake-pad-compounds\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e\u0026gt;AVAILABLE PAD COMPOUNDS\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/products\/paragon-pa015-pa035-caliper-brake-pads\" target=\"_blank\"\u003e\u003cspan style=\"font-size: medium; color: #0000ff;\"\u003e \u0026gt;\u003cspan style=\"color: #0000ff;\"\u003eMORE INFO REGARDING THE PAD SHAPE\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eGoodridge Stainless Steel Braided Brake Lines\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- custom tab --\u003e\n\u003ch4 class=\"page-heading\"\u003eWheel Fitment\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWheel Fitment Template Download (PDF): \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA015\/PA015%20355x32mm%20Wheel%20Fitment%20Template%20-%20Audi%20TT%20%288N%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e355x32mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20TT%20%288N%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt; \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to use the wheel fitment template (PDF)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large; color: #000000;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e**355mm brake kits generally require 18\" or larger wheels, while 378mm brake kits generally require 18\"\/19\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u0026amp;\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Street\/Sport","offer_id":48057675841844,"sku":"PBK.02.212.355.320.TL.01.02.P3.F","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Ceramic","offer_id":48057675809076,"sku":"PBK.02.212.355.320.TL.01.02.P2.F","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057675874612,"sku":"PBK.02.212.355.320.TL.01.02.R5.F","price":2715.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057675907380,"sku":"PBK.02.212.355.320.TL.01.02.R7.F","price":2755.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ P3 Street\/Sport","offer_id":48057675972916,"sku":"PBK.02.212.355.320.TL.02.02.P3.F","price":2850.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ P2 Ceramic","offer_id":48057675940148,"sku":"PBK.02.212.355.320.TL.02.02.P2.F","price":2850.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057676005684,"sku":"PBK.02.212.355.320.TL.02.02.R5.F","price":2915.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057676038452,"sku":"PBK.02.212.355.320.TL.02.02.R7.F","price":2955.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Street\/Sport","offer_id":48057676103988,"sku":"PBK.05.212.378.360.TL.01.02.P3.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Ceramic","offer_id":48057676071220,"sku":"PBK.05.212.378.360.TL.01.02.P2.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057676136756,"sku":"PBK.05.212.378.360.TL.01.02.R5.F","price":3015.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057676169524,"sku":"PBK.05.212.378.360.TL.01.02.R7.F","price":3055.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Street\/Sport","offer_id":48057676235060,"sku":"PBK.05.212.378.360.TL.02.02.P3.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Ceramic","offer_id":48057676202292,"sku":"PBK.05.212.378.360.TL.02.02.P2.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057676267828,"sku":"PBK.05.212.378.360.TL.02.02.R5.F","price":3215.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057676300596,"sku":"PBK.05.212.378.360.TL.02.02.R7.F","price":3255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG6PistonKit_54b15dbb-5c2c-4874-986f-f7d96fe69073.png?v=1720571925"},{"product_id":"paragon-track-performance-big-brake-kit-pa015-pa035-6-piston-vw-pq35-mqb-front","title":"Paragon Track Performance VW\/Audi PQ35\/MQB Big Brake Kit 6 Piston Front\/VW Golf\/GTI\/Golf R Mk5\/6\/7\/8","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eParagon Track Performance Big Brake Kit (PA015 \/ PA035 6 piston) - VW PQ35\/MQB\/ Golf\/GTI\/Golf R Mk5\/6\/7\/8\u003cbr\u003e\u003cbr\u003eFits:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVW Golf\/GTI\/Golf R Mk5\/6\/7\/8 (PQ35\/MQB)\u003c\/li\u003e\n\u003cli\u003eAudi A3\/S3 (8V)\u003c\/li\u003e\n\u003cli\u003eAudi TT\/TTS\/TT RS (8J)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2006-2009 VW Golf\/GTI\/Golf R Mk5 Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2010-2014 VW Golf\/GTI\/Golf R Mk6 Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2015-2021 VW Golf\/GTI\/Golf R Mk7 Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2022-Present VW Golf\/GTI\/Golf R Mk8 Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2014-Present Audi A3\/S3 (8V) Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2006-2014 Audi TT \/ TTS (8J) Front\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e2009-2010 Audi TT RS (8J) Front\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures Paragon PA015 \/ PA035 6 piston calipers \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"font-size: small;\"\u003e*Only difference between the PA015 and PA035 calipers is the maximum rotor size they can accommodate\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFully-floating 2-piece rotors, with directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePiston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eRecommended usage: Street \/ Track\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eComplete pre-assembled axle set\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: large;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon PA015 \/ PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon f\u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003eully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of Paragon P3 “Street\/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of caliper anti rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: large;\"\u003e\u003cstrong\u003e***Please verify wheel fitment \/ clearance before ordering. All Paragon big brake kits are custom made\/packaged to order, and cannot be returned due to wheel fitment issues.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eWheel Fitment Template Download (PDF): \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA015\/PA015%20355x32mm%20Wheel%20Fitment%20Template%20%28Letter%20Size%29%20-%20Volkswagen%20Golf%20GTI%20Mk5%206%207%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e355x32mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20VW%20PQ35%20MQB%20Golf%20GTI%20Golf%20R%20Mk5678%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt;\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eHow to use the wheel fitment template (PDF)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e**\u003cstrong\u003e\u003cspan\u003e355mm brake kits generally require 18\" or larger wheels, while 378mm brake kits generally require 18\"\/19\" or larger wheels. \u003c\/span\u003e\u003c\/strong\u003eFitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eVW PQ35\/MQB Front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eKit Number:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.02.098.355.320.TL.01.02.Px.F (355x32mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003ePBK.05.098.378.360.TL.01.02.Px.F (378x36mm Rotor)\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003ePA015 \/ PA035 6 Piston Calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from billet 6061-T6 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOutstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness\/modulation characteristics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eTitanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris\/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized finish for improved wear resistance. Unlike painted\/powder coated calipers, hard anodized finish will not deteriorate under extreme heat\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStrong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOptional anti-knockback springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel bleed screws and crossover pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEach caliper is pressure tested to guarantee proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating 2-piece Rotors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCurved Directional Ventilation Vanes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eSlotted Friction Face\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eHard Anodized Aluminum Hats\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating Bobbins \u0026amp; Mounting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCaliper Mounting Brackets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eParagon Brake Pads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003e\u003cspan\u003ePA015 \/ PA035 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/brake-pad-info\/winmax-brake-pad-compounds\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e\u0026gt;AVAILABLE PAD COMPOUNDS\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/products\/paragon-pa015-pa035-caliper-brake-pads\" target=\"_blank\"\u003e\u003cspan style=\"font-size: medium; color: #0000ff;\"\u003e \u0026gt;\u003cspan style=\"color: #0000ff;\"\u003eMORE INFO REGARDING THE PAD SHAPE\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eGoodridge Stainless Steel Braided Brake Lines\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- custom tab --\u003e\n\u003ch4 class=\"page-heading\"\u003eWheel Fitment\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWheel Fitment Template Download (PDF): \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA015\/PA015%20355x32mm%20Wheel%20Fitment%20Template%20%28Letter%20Size%29%20-%20Volkswagen%20Golf%20GTI%20Mk5%206%207%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e355x32mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20VW%20PQ35%20MQB%20Golf%20GTI%20Golf%20R%20Mk5678%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt; \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to use the wheel fitment template (PDF)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large; color: #000000;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e**355mm brake kits generally require 18\" or larger wheels, while 378mm brake kits generally require 18\"\/19\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Paragon","offers":[{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Street\/Sport","offer_id":48057712247092,"sku":"PBK.02.098.355.320.TL.01.02.P3.F","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Ceramic","offer_id":48057712214324,"sku":"PBK.02.098.355.320.TL.01.02.P2.F","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057712279860,"sku":"PBK.02.098.355.320.TL.01.02.R5.F","price":2715.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057712312628,"sku":"PBK.02.098.355.320.TL.01.02.R7.F","price":2755.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ P3 Street\/Sport","offer_id":48057712378164,"sku":"PBK.02.098.355.320.TL.02.02.P3.F","price":2850.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ P2 Ceramic","offer_id":48057712345396,"sku":"PBK.02.098.355.320.TL.02.02.P2.F","price":2850.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057712410932,"sku":"PBK.02.098.355.320.TL.02.02.R5.F","price":2915.0,"currency_code":"USD","in_stock":true},{"title":"with 355x32mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057712443700,"sku":"PBK.02.098.355.320.TL.02.02.R7.F","price":2955.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Street\/Sport","offer_id":48057712509236,"sku":"PBK.05.098.378.360.TL.01.02.P3.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Ceramic","offer_id":48057712476468,"sku":"PBK.05.098.378.360.TL.01.02.P2.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057712542004,"sku":"PBK.05.098.378.360.TL.01.02.R5.F","price":3015.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057712574772,"sku":"PBK.05.098.378.360.TL.01.02.R7.F","price":3055.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Street\/Sport","offer_id":48057712640308,"sku":"PBK.05.098.378.360.TL.02.02.P3.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Ceramic","offer_id":48057712607540,"sku":"PBK.05.098.378.360.TL.02.02.P2.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057712673076,"sku":"PBK.05.098.378.360.TL.02.02.R5.F","price":3215.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057712705844,"sku":"PBK.05.098.378.360.TL.02.02.R7.F","price":3255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG6PistonKit_e7a49311-81ce-4170-aef9-d78809c0ff1f.png?v=1720572313"},{"product_id":"paragon-track-performance-big-brake-kit-pa035-6-piston-audi-c7-a6-s6-a7-s7-d4-a8-front","title":"Paragon Track Performance Big Brake Kit (PA035 6 piston) - Audi C7 A6\/S6\/A7\/S7\/Q5\/SQ5 \/ D4 A8 Front","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eParagon Track Performance Big Brake Kit (PA035 6 piston) - Audi C7 A6\/S6\/A7\/S7\/Q5\/SQ5 \/ D4 A8 Front\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFully-floating 2-piece rotors, with 72 directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePiston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eRecommended usage: Street \/ Track\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eComplete pre-assembled axle set\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: large;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon 72 vane fully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of Paragon P3 “Street\/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of caliper anti rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: large;\"\u003e\u003cstrong\u003e***Please verify wheel fitment \/ clearance before ordering. All Paragon big brake kits are custom made\/packaged to order, and cannot be returned due to wheel fitment issues.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eWheel Fitment Template Download (PDF): \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20C7%20A6%20S6%20A7%20S7%20%20D4%20A8%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20410x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20C7%20A6%20S6%20A7%20S7%20D4%20A8%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e410x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt;\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eHow to use the wheel fitment template (PDF)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e**378mm brake kits generally require 18\"\/19\" or larger wheels, while 410mm brake kits generally require 20\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2012-Present Audi A6\/S6 (C7) Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2011-2018 Audi A7\/S7 (C7) Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2011-2017 Audi A8 (D4) Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eKit Number:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.05.070.378.360.TL.01.02.Px.F (378x36mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.05.070.410.360.TL.01.02.Px.F (410x36mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003ePA035 6 Piston Calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from billet 6061-T6 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOutstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness\/modulation characteristics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eTitanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris\/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized finish for improved wear resistance. Unlike painted\/powder coated calipers, hard anodized finish will not deteriorate under extreme heat\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStrong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOptional anti-knockback springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel bleed screws and crossover pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEach caliper is pressure tested to guarantee proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating 2-piece Rotors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCurved Directional Ventilation Vanes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eSlotted Friction Face\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eHard Anodized Aluminum Hats\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating Bobbins \u0026amp; Mounting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCaliper Mounting Brackets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eParagon Brake Pads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003e\u003cspan\u003ePA035 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/brake-pad-info\/winmax-brake-pad-compounds\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e\u0026gt;AVAILABLE PAD COMPOUNDS\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/products\/paragon-pa015-pa035-caliper-brake-pads\" target=\"_blank\"\u003e\u003cspan style=\"font-size: medium; color: #0000ff;\"\u003e \u0026gt;\u003cspan style=\"color: #0000ff;\"\u003eMORE INFO REGARDING THE PAD SHAPE\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eGoodridge Stainless Steel Braided Brake Lines\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- custom tab --\u003e\n\u003ch4 class=\"page-heading\"\u003eWheel Fitment\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWheel Fitment Template Download (PDF):\u003c\/strong\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20C7%20A6%20S6%20A7%20S7%20%20D4%20A8%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e378x36mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e \/ \u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20410x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20C7%20A6%20S6%20A7%20S7%20D4%20A8%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e410x36mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt; \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to use the wheel fitment template (PDF)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large; color: #000000;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e**378mm brake kits generally require 18\"\/19\" or larger wheels, while 410mm brake kits generally require 20\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u0026amp;\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Street","offer_id":48057738985780,"sku":"PBK.05.070.378.360.TL.01.02.P2.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Sport","offer_id":48057739018548,"sku":"PBK.05.070.378.360.TL.01.02.P3.F","price":2861.5,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057739051316,"sku":"PBK.05.070.378.360.TL.01.02.R5.F","price":2924.55,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057739084084,"sku":"PBK.05.070.378.360.TL.01.02.R7.F","price":3055.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Street","offer_id":48057739116852,"sku":"PBK.05.070.378.360.TL.02.02.P2.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Sport","offer_id":48057739149620,"sku":"PBK.05.070.378.360.TL.02.02.P3.F","price":3055.5,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057739182388,"sku":"PBK.05.070.378.360.TL.02.02.R5.F","price":3118.55,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057739215156,"sku":"PBK.05.070.378.360.TL.02.02.R7.F","price":3255.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Street","offer_id":48057739247924,"sku":"PBK.05.070.410.360.TL.01.02.P2.F","price":3050.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Sport","offer_id":48057739280692,"sku":"PBK.05.070.410.360.TL.01.02.P3.F","price":2958.5,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057739313460,"sku":"PBK.05.070.410.360.TL.01.02.R5.F","price":3021.55,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057739346228,"sku":"PBK.05.070.410.360.TL.01.02.R7.F","price":3155.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Street","offer_id":48057739378996,"sku":"PBK.05.070.410.360.TL.02.02.P2.F","price":3250.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Sport","offer_id":48057739411764,"sku":"PBK.05.070.410.360.TL.02.02.P3.F","price":3152.5,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057739444532,"sku":"PBK.05.070.410.360.TL.02.02.R5.F","price":3215.55,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057739477300,"sku":"PBK.05.070.410.360.TL.02.02.R7.F","price":3355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG6PistonKit_3e4ad853-17ad-4af0-adb0-506f16af3a69.png?v=1720572668"},{"product_id":"paragon-track-performance-big-brake-kit-pa035-6-piston-audi-q5-b8-b8-5-front","title":"Paragon Track Performance Big Brake Kit (PA035 6 piston) - Audi Q5 (B8\/B8.5) Front","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eParagon Track Performance Big Brake Kit (PA035 6 piston) - Audi Q5 (B8\/B8.5) Front\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFully-floating 2-piece rotors, with 72 directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePiston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eRecommended usage: Street \/ Track\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eComplete pre-assembled axle set\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: large;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon 72 vane fully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of Paragon P3 “Street\/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of caliper anti rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: large;\"\u003e\u003cstrong\u003e***Please verify wheel fitment \/ clearance before ordering. All Paragon big brake kits are custom made\/packaged to order, and cannot be returned due to wheel fitment issues.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eWheel Fitment Template Download (PDF): \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20Q5%20%28B8%20B8.5%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20410x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20Q5%20%28B8%20B8.5%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e410x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt;\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eHow to use the wheel fitment template (PDF)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e**378mm brake kits generally require 18\"\/19\" or larger wheels, while 410mm brake kits generally require 20\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2008-2017 Audi Q5 (B8\/B8.5) Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eKit Number:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.05.070.378.360.TL.01.02.Px.F (378x36mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.05.070.410.360.TL.01.02.Px.F (410x36mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003ePA035 6 Piston Calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from billet 6061-T6 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOutstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness\/modulation characteristics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eTitanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris\/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized finish for improved wear resistance. Unlike painted\/powder coated calipers, hard anodized finish will not deteriorate under extreme heat\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStrong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOptional anti-knockback springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel bleed screws and crossover pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEach caliper is pressure tested to guarantee proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating 2-piece Rotors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCurved Directional Ventilation Vanes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eSlotted Friction Face\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eHard Anodized Aluminum Hats\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating Bobbins \u0026amp; Mounting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCaliper Mounting Brackets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eParagon Brake Pads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003e\u003cspan\u003ePA035 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/brake-pad-info\/winmax-brake-pad-compounds\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e\u0026gt;AVAILABLE PAD COMPOUNDS\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/products\/paragon-pa015-pa035-caliper-brake-pads\" target=\"_blank\"\u003e\u003cspan style=\"font-size: medium; color: #0000ff;\"\u003e \u0026gt;\u003cspan style=\"color: #0000ff;\"\u003eMORE INFO REGARDING THE PAD SHAPE\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eGoodridge Stainless Steel Braided Brake Lines\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- custom tab --\u003e\n\u003ch4 class=\"page-heading\"\u003eWheel Fitment\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWheel Fitment Template Download (PDF):\u003c\/strong\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20Q5%20%28B8%20B8.5%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e378x36mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e \/ \u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20410x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20Q5%20%28B8%20B8.5%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e410x36mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt; \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to use the wheel fitment template (PDF)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large; color: #000000;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e**378mm brake kits generally require 18\"\/19\" or larger wheels, while 410mm brake kits generally require 20\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u0026amp;\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Street","offer_id":48057739542836,"sku":"PBK.05.070.378.360.TL.01.02.P2.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Sport","offer_id":48057739575604,"sku":"PBK.05.070.378.360.TL.01.02.P3.F","price":2861.5,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057739608372,"sku":"PBK.05.070.378.360.TL.01.02.R5.F","price":2924.55,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057739641140,"sku":"PBK.05.070.378.360.TL.01.02.R7.F","price":3055.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Street","offer_id":48057739673908,"sku":"PBK.05.070.378.360.TL.02.02.P2.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Sport","offer_id":48057739706676,"sku":"PBK.05.070.378.360.TL.02.02.P3.F","price":3055.5,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057739739444,"sku":"PBK.05.070.378.360.TL.02.02.R5.F","price":3118.55,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057739772212,"sku":"PBK.05.070.378.360.TL.02.02.R7.F","price":3255.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Street","offer_id":48057739804980,"sku":"PBK.05.070.410.360.TL.01.02.P2.F","price":3050.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Sport","offer_id":48057739837748,"sku":"PBK.05.070.410.360.TL.01.02.P3.F","price":2958.5,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057739870516,"sku":"PBK.05.070.410.360.TL.01.02.R5.F","price":3021.55,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057739903284,"sku":"PBK.05.070.410.360.TL.01.02.R7.F","price":3155.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Street","offer_id":48057739936052,"sku":"PBK.05.070.410.360.TL.02.02.P2.F","price":3250.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Sport","offer_id":48057739968820,"sku":"PBK.05.070.410.360.TL.02.02.P3.F","price":3152.5,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057740001588,"sku":"PBK.05.070.410.360.TL.02.02.R5.F","price":3215.55,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057740034356,"sku":"PBK.05.070.410.360.TL.02.02.R7.F","price":3355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG6PistonKit_55af16eb-9920-4652-a7ae-6d4832711c50.png?v=1720572676"},{"product_id":"paragon-track-performance-big-brake-kit-pa035-6-piston-audi-q7-4l-front","title":"Paragon Track Performance Big Brake Kit (PA035 6 piston) - Audi Q7 (4L) Front","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eParagon Track Performance Big Brake Kit (PA035 6 piston) - Audi Q7 (4L) Front\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFully-floating 2-piece rotors, with 72 directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePiston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eRecommended usage: Street \/ Track\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eComplete pre-assembled axle set\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: large;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon 72 vane fully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of Paragon P3 “Street\/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of caliper anti rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: large;\"\u003e\u003cstrong\u003e***Please verify wheel fitment \/ clearance before ordering. All Paragon big brake kits are custom made\/packaged to order, and cannot be returned due to wheel fitment issues.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eWheel Fitment Template Download (PDF): \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20Q7%20%284L%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e \/ \u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20410x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20Q7%20%284L%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e410x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt;\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eHow to use the wheel fitment template (PDF)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e**378mm brake kits generally require 18\"\/19\" or larger wheels, while 410mm brake kits generally require 20\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2005-2015 Audi Q7 (4L) Front\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eKit Number:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.05.069.378.360.TL.01.02.Px.F (378x36mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.05.069.410.360.TL.01.02.Px.F (410x36mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003ePA035 6 Piston Calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from billet 6061-T6 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOutstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness\/modulation characteristics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eTitanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris\/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized finish for improved wear resistance. Unlike painted\/powder coated calipers, hard anodized finish will not deteriorate under extreme heat\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStrong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOptional anti-knockback springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel bleed screws and crossover pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEach caliper is pressure tested to guarantee proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating 2-piece Rotors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCurved Directional Ventilation Vanes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eSlotted Friction Face\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eHard Anodized Aluminum Hats\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating Bobbins \u0026amp; Mounting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCaliper Mounting Brackets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eParagon Brake Pads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003e\u003cspan\u003ePA035 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/brake-pad-info\/winmax-brake-pad-compounds\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e\u0026gt;AVAILABLE PAD COMPOUNDS\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/products\/paragon-pa015-pa035-caliper-brake-pads\" target=\"_blank\"\u003e\u003cspan style=\"font-size: medium; color: #0000ff;\"\u003e \u0026gt;\u003cspan style=\"color: #0000ff;\"\u003eMORE INFO REGARDING THE PAD SHAPE\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eGoodridge Stainless Steel Braided Brake Lines\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- custom tab --\u003e\n\u003ch4 class=\"page-heading\"\u003eWheel Fitment\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWheel Fitment Template Download (PDF):\u003c\/strong\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20Q7%20%284L%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e378x36mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e \/ \u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20410x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20Q7%20%284L%29%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e410x36mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt; \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to use the wheel fitment template (PDF)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large; color: #000000;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e**378mm brake kits generally require 18\"\/19\" or larger wheels, while 410mm brake kits generally require 20\" or larger wheels. Fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u0026amp;\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Street","offer_id":48057740132660,"sku":"PBK.05.069.378.360.TL.01.02.P2.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Sport","offer_id":48057740165428,"sku":"PBK.05.069.378.360.TL.01.02.P3.F","price":2861.5,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057740198196,"sku":"PBK.05.069.378.360.TL.01.02.R5.F","price":2924.55,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057740230964,"sku":"PBK.05.069.378.360.TL.01.02.R7.F","price":3055.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Street","offer_id":48057740263732,"sku":"PBK.05.069.378.360.TL.02.02.P2.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Sport","offer_id":48057740296500,"sku":"PBK.05.069.378.360.TL.02.02.P3.F","price":3055.5,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057740329268,"sku":"PBK.05.069.378.360.TL.02.02.R5.F","price":3118.55,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057740362036,"sku":"PBK.05.069.378.360.TL.02.02.R7.F","price":3255.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Street","offer_id":48057740394804,"sku":"PBK.05.069.410.360.TL.01.02.P2.F","price":3050.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Sport","offer_id":48057740427572,"sku":"PBK.05.069.410.360.TL.01.02.P3.F","price":2958.5,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057740460340,"sku":"PBK.05.069.410.360.TL.01.02.R5.F","price":3021.55,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057740493108,"sku":"PBK.05.069.410.360.TL.01.02.R7.F","price":3155.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Street","offer_id":48057740525876,"sku":"PBK.05.069.410.360.TL.02.02.P2.F","price":3250.0,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Sport","offer_id":48057740558644,"sku":"PBK.05.069.410.360.TL.02.02.P3.F","price":3152.5,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057740591412,"sku":"PBK.05.069.410.360.TL.02.02.R5.F","price":3215.55,"currency_code":"USD","in_stock":true},{"title":"with 410x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057740624180,"sku":"PBK.05.069.410.360.TL.02.02.R7.F","price":3355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG6PistonKit_06a1a98f-b3f8-4a75-912b-c00f7adddadf.png?v=1720572683"},{"product_id":"paragon-track-performance-big-brake-kit-pa035-6-piston-audi-rs3-8v-8v-5-sedan-front","title":"Paragon Track Performance Big Brake Kit (PA035 6 piston) - Audi RS3 (8V \/ 8V.5) Sedan Front","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eParagon Track Performance Big Brake Kit (PA035 6 piston) - Audi RS3 (8V \/ 8V.5) Sedan Front\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eParagon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts. Come complete with every component required to upgrade your brake system. Developed with performance, quality, and longevity in mind, only the finest materials\/components were used to ensure the brake kits to perform and last under both street and track conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFully-floating 2-piece rotors, with 72 directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized calipers and rotor hats for increased resistance to wear and discoloration under extreme track conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePiston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConfidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eRecommended usage: Street \/ Track\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eComplete pre-assembled axle set\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; font-size: large;\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon PA035 6 piston calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Paragon 72 vane fully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of Paragon P3 “Street\/Track” semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of caliper mounting brackets and all necessary hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne pair of Goodridge DOT approved stainless steel braided brake lines\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOne set of caliper anti rattle clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDetailed installation manual\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000; font-size: large;\"\u003e\u003cstrong\u003e***Please verify wheel fitment \/ clearance before ordering. All Paragon big brake kits are custom made\/packaged to order, and cannot be returned due to wheel fitment issues.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003eWheel Fitment Template Download (PDF): \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20RS3%20%288V%208V.5%29%20Sedan%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e378x36mm\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt;\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eHow to use the wheel fitment template (PDF)\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: large;\"\u003e**378mm brake kits generally require 18\"\/19\" or larger wheels, but fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan\u003e2015-2020 Audi RS3 (8V \/ 8V.5) Sedan Front\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eKit Number:\u003c\/strong\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003ePBK.05.006.378.360.TL.01.02.Px.F (378x36mm Rotor)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003ePA035 6 Piston Calipers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from billet 6061-T6 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOutstanding rigidity. Reduces compliance which allow for a consistent pedal feel, and improves responsiveness\/modulation characteristics\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eTitanium nitride (TiN) coated pistons. Improve durability and extend service intervals by protecting the sliding surfaces of the pistons. Allow smooth piston travel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel pistons can act as an effective thermal barrier due to the lower thermal conductivity vs. aluminum pistons, which help prevent brake fluid boiling and brake fade. Extra machining is done to minimize contact with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStaggered piston bore sizes for improved brake balance and even pad wear\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh temperature piston seals and internal dust seals are utilized to withstand the heat generated under harsh track conditions and extend caliper service life. Internal dust seals are able to offer protection against debris\/contaminants and will not melt as easily as the external dust boots that are commonly used on OEM calipers\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized finish for improved wear resistance. Unlike painted\/powder coated calipers, hard anodized finish will not deteriorate under extreme heat\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplaceable stainless steel abutment plates to allow smooth braking action and prevent wear on the caliper body\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStrong, yet lightweight. Each caliper weighs 6.5 lbs (without pads)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eOptional anti-knockback springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eStainless steel bleed screws and crossover pipes\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eEach caliper is pressure tested to guarantee proper operation\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating 2-piece Rotors\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFloating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior braking and cooling performance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eMade of CM-250 special formulated high carbon alloy cast iron. Allows for an optimal bite, thermal characteristics, high-temperature strength, and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHeat treated to release stress in the rotor to avoid deformation and vibration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eState-of-the-art CBN surface machining to ensure better break-in with new brake pads\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eExcellent thermal capacity. Allows the rotors to absorb and dissipate heat more efficiently and help reduce chance of brake fade\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eReplacement rotor rings available at competitive price\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCurved Directional Ventilation Vanes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eFeatures 72 directional ventilation vanes to create suction and turbulence, and guide cool air through the rotor to achieve better heat dissipation and increased resistance to cracking under harsh track conditions. Each rotor is left or right side specific, and the ventilation vanes are optimized to spin in a particular direction to pump the maximum amount of cool air through the rotor. This design allows the rotor to run up to 30% cooler than O.E. rotors and increases cooling efficiency by up to 30% over standard 1-piece units. Brake fade and judder are minimized during extended sessions. This means the brake system can withstand heavier track usage and provide consistent braking performance lap after lap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eSlotted Friction Face\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eSlotted rotor face pattern improves brake consistency by constantly cleaning the contact surface and dissipate heat generated, and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eHard Anodized Aluminum Hats\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined from lightweight 6061-T6 aerospace grade aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eUnsprung weight reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh strength and durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHard anodized to increase resistance to wear, corrosion, and discoloration\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eFloating Bobbins \u0026amp; Mounting System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eUtilizes T-Bobbin rotor to hat mounting system to allow \"float\" in both radial and axial directions, and minimize brake judder. The high quality stainless steel hardware are corrosion resistant which allows secure mounting, and smooth expansion and contraction throughout heat cycles. Anti wear clips (McLaren spring clips) are utilized to slightly pre-load the rotor assembly and minimize rattling noise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eCaliper Mounting Brackets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: medium;\"\u003eCNC machined caliper mounting brackets to ensure superior strength, durability, and secure mounting of calipers to knuckles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eParagon Brake Pads\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eManufactured by Winmax Japan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior stopping power and modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eHigh fade resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eConsistent performance under high temperature conditions\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eCompounds available for street, street \/ track, and dedicated track applications\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cspan id=\"docs-internal-guid-80a83d30-7fff-d89c-c9e6-2ea36b910309\"\u003e\u003cspan\u003ePA035 caliper uses a common pad shape, with compounds readily available from various manufacturers\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/blogs\/brake-pad-info\/winmax-brake-pad-compounds\/\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: medium;\"\u003e\u0026gt;AVAILABLE PAD COMPOUNDS\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/alconkits.com\/products\/paragon-pa015-pa035-caliper-brake-pads\" target=\"_blank\"\u003e\u003cspan style=\"font-size: medium; color: #0000ff;\"\u003e \u0026gt;\u003cspan style=\"color: #0000ff;\"\u003eMORE INFO REGARDING THE PAD SHAPE\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan style=\"font-size: x-large;\"\u003e\u003cstrong\u003eGoodridge Stainless Steel Braided Brake Lines\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eSuperior durability. Abrasion and corrosion resistant\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eAllows more responsive and firmer pedal feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: medium;\"\u003eDOT \/ TÜV certified\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- custom tab --\u003e\n\u003ch4 class=\"page-heading\"\u003eWheel Fitment\u003c\/h4\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eWheel Fitment Template Download (PDF):\u003c\/strong\u003e \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/Wheel%20Fitment%20Template\/PA035\/PA035%20378x36mm%20Wheel%20Fitment%20Template%20-%20Audi%20RS3%20%288V%208V.5%29%20Sedan%20Front.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e378x36mm\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large;\"\u003e\u0026gt; \u003cspan style=\"color: #0000ff;\"\u003e\u003ca href=\"https:\/\/store-8pb2bpl705.mybigcommerce.com\/content\/big-brake-kit-wheel-fitment-guide.pdf\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to use the wheel fitment template (PDF)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: large; color: #000000;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e**378mm brake kits generally require 18\"\/19\" or larger wheels, but fitment varies due to different specs \/ wheel design. Verify fitment with wheel fitment template.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u0026lt;\u0026amp;\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P2 Street","offer_id":48057740788020,"sku":"PBK.05.006.378.360.TL.01.02.P2.F","price":2950.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ P3 Sport","offer_id":48057740820788,"sku":"PBK.05.006.378.360.TL.01.02.P3.F","price":2861.5,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R5 Med Track","offer_id":48057740853556,"sku":"PBK.05.006.378.360.TL.01.02.R5.F","price":2924.55,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ Mil-Spec Hard Coat Anodizing \/ R7 Hi Temp Track","offer_id":48057740886324,"sku":"PBK.05.006.378.360.TL.01.02.R7.F","price":3055.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P2 Street","offer_id":48057740919092,"sku":"PBK.05.006.378.360.TL.02.02.P2.F","price":3150.0,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ P3 Sport","offer_id":48057740951860,"sku":"PBK.05.006.378.360.TL.02.02.P3.F","price":3055.5,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R5 Med Track","offer_id":48057740984628,"sku":"PBK.05.006.378.360.TL.02.02.R5.F","price":3118.55,"currency_code":"USD","in_stock":true},{"title":"with 378x36mm rotor \/ ENP Electroless Nickel Plating \/ R7 Hi Temp Track","offer_id":48057741017396,"sku":"PBK.05.006.378.360.TL.02.02.R7.F","price":3255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/PG6PistonKit_b0255cb4-1a33-4853-aa91-48a2ba38d9c7.png?v=1720572690"},{"product_id":"goodridge-05-audi-a4-s4-brake-lines","title":"Goodridge 05+ Audi A4 \u0026 S4 Brake Lines","description":"\u003cp\u003eGoodridge stainless steel brake line kit for the 05+ Audi A4 \u0026amp; S4 stainless steel brake and clutch hose kits are designed to fit your OEM Caliper perfectly.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(175, 2, 2);\"\u003e\u003cem\u003e\u003cstrong\u003eNote: This is a brake like kit intended for your OEM calipers, not Alcon big brake kits that come with their own brake lines.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEach kit features a high-grade hose with a PTFE core protected by a stainless steel outer braid. This construction prevents pedal softness under demanding conditions, enhancing braking performance and clutch responsiveness while offering excellent abrasion and corrosion resistance. These kits deliver the reliability and safety required, along with an attractive finish that elevates the look of any installation. \u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKeywords:\u003c\/strong\u003e stainless steel brake lines, performance brake upgrade, DOT approved brake hoses, Goodridge brake kit, 05+ Audi A4 \u0026amp; S4 brake lines, 05+ Audi A4 \u0026amp; S4 performance parts","brand":"Goodridge","offers":[{"title":"Default Title","offer_id":48894274830644,"sku":"GRI30006","price":311.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/fb122d61913969ca002755c7030ae5bf_6f7d4ed5-dc69-4925-b0ef-bb35b560ee2f.jpg?v=1757876400"},{"product_id":"goodridge-12-18-audi-a6-a6-quattro-fits-320-356-400mm-rotors-stainless-steel-brake-line-kit","title":"Goodridge 12-18 Audi A6\/A6 Quattro (Fits 320\/356\/400mm Rotors) Stainless Steel Brake Line Kit","description":"\u003cp\u003eGoodridge stainless steel brake line kit for the 12-18 Audi A6\/A6 Quattro (Fits 320\/356\/400mm Rotors) stainless steel brake and clutch hose kits are designed to fit your OEM Caliper perfectly.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(175, 2, 2);\"\u003e\u003cem\u003e\u003cstrong\u003eNote: This is a brake like kit intended for your OEM calipers, not Alcon big brake kits that come with their own brake lines.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEach kit features a high-grade hose with a PTFE core protected by a stainless steel outer braid. This construction prevents pedal softness under demanding conditions, enhancing braking performance and clutch responsiveness while offering excellent abrasion and corrosion resistance. These kits deliver the reliability and safety required, along with an attractive finish that elevates the look of any installation. \u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKeywords:\u003c\/strong\u003e stainless steel brake lines, performance brake upgrade, DOT approved brake hoses, Goodridge brake kit, 12-18 Audi A6\/A6 Quattro (Fits 320\/356\/400mm Rotors) brake lines, 12-18 Audi A6\/A6 Quattro (Fits 320\/356\/400mm Rotors) performance parts","brand":"Goodridge","offers":[{"title":"Default Title","offer_id":48894274961716,"sku":"GRI30016","price":260.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/fb122d61913969ca002755c7030ae5bf_33a79fe1-c30f-4784-8091-6c43cbce5050.jpg?v=1757876407"},{"product_id":"goodridge-13-17-audi-s7-14-17-audi-rs7-fits-390-420mm-rotors-ss-brake-lines","title":"Goodridge 13-17 Audi S7 \/ 14-17 Audi RS7 (Fits 390\/420mm Rotors) SS Brake Lines","description":"\u003cp\u003eGoodridge stainless steel brake line kit for the 13-17 Audi S7 \/ 14-17 Audi RS7 (Fits 390\/420mm Rotors) SS stainless steel brake and clutch hose kits are designed to fit your OEM Caliper perfectly.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(175, 2, 2);\"\u003e\u003cem\u003e\u003cstrong\u003eNote: This is a brake like kit intended for your OEM calipers, not Alcon big brake kits that come with their own brake lines.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEach kit features a high-grade hose with a PTFE core protected by a stainless steel outer braid. This construction prevents pedal softness under demanding conditions, enhancing braking performance and clutch responsiveness while offering excellent abrasion and corrosion resistance. These kits deliver the reliability and safety required, along with an attractive finish that elevates the look of any installation. \u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKeywords:\u003c\/strong\u003e stainless steel brake lines, performance brake upgrade, DOT approved brake hoses, Goodridge brake kit, 13-17 Audi S7 \/ 14-17 Audi RS7 (Fits 390\/420mm Rotors) SS brake lines, 13-17 Audi S7 \/ 14-17 Audi RS7 (Fits 390\/420mm Rotors) SS performance parts","brand":"Goodridge","offers":[{"title":"Default Title","offer_id":48894275027252,"sku":"GRI30017","price":260.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/fb122d61913969ca002755c7030ae5bf_698ac920-30fb-4a9b-91a6-0d8f7712dc4f.jpg?v=1757876405"},{"product_id":"goodridge-11-15-audi-a8-quattro-ss-brake-line-kit","title":"Goodridge 11-15 Audi A8 Quattro SS Brake Line Kit","description":"\u003cp\u003eGoodridge stainless steel brake line kit for the 11-15 Audi A8 Quattro SS stainless steel brake and clutch hose kits are designed to fit your OEM Caliper perfectly.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(175, 2, 2);\"\u003e\u003cem\u003e\u003cstrong\u003eNote: This is a brake like kit intended for your OEM calipers, not Alcon big brake kits that come with their own brake lines.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEach kit features a high-grade hose with a PTFE core protected by a stainless steel outer braid. This construction prevents pedal softness under demanding conditions, enhancing braking performance and clutch responsiveness while offering excellent abrasion and corrosion resistance. These kits deliver the reliability and safety required, along with an attractive finish that elevates the look of any installation. \u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKeywords:\u003c\/strong\u003e stainless steel brake lines, performance brake upgrade, DOT approved brake hoses, Goodridge brake kit, 11-15 Audi A8 Quattro SS brake lines, 11-15 Audi A8 Quattro SS performance parts","brand":"Goodridge","offers":[{"title":"Default Title","offer_id":48894275125556,"sku":"GRI30018","price":260.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/fb122d61913969ca002755c7030ae5bf_305120c1-6881-4c95-ad30-636a68f7c7ee.jpg?v=1757876406"},{"product_id":"goodridge-10-16-audi-rs5-all-models-ss-brake-line-kit","title":"Goodridge 10-16 Audi RS5 (All Models) SS Brake Line Kit","description":"\u003cp\u003eGoodridge stainless steel brake line kit for the 10-16 Audi RS5 (All Models) SS stainless steel brake and clutch hose kits are designed to fit your OEM Caliper perfectly.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(175, 2, 2);\"\u003e\u003cem\u003e\u003cstrong\u003eNote: This is a brake like kit intended for your OEM calipers, not Alcon big brake kits that come with their own brake lines.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEach kit features a high-grade hose with a PTFE core protected by a stainless steel outer braid. This construction prevents pedal softness under demanding conditions, enhancing braking performance and clutch responsiveness while offering excellent abrasion and corrosion resistance. These kits deliver the reliability and safety required, along with an attractive finish that elevates the look of any installation. \u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKeywords:\u003c\/strong\u003e stainless steel brake lines, performance brake upgrade, DOT approved brake hoses, Goodridge brake kit, 10-16 Audi RS5 (All Models) SS brake lines, 10-16 Audi RS5 (All Models) SS performance parts","brand":"Goodridge","offers":[{"title":"Default Title","offer_id":48894275191092,"sku":"GRI30020","price":260.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/fb122d61913969ca002755c7030ae5bf_df623b74-f73e-4fa1-8387-c0ea901818d4.jpg?v=1757876409"},{"product_id":"goodridge-99-07-audi-tt-ss-brake-lines","title":"Goodridge 99-07 Audi TT SS Brake Lines","description":"\u003cp\u003eGoodridge stainless steel brake line kit for the 99-07 Audi TT SS stainless steel brake and clutch hose kits are designed to fit your OEM Caliper perfectly.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(175, 2, 2);\"\u003e\u003cem\u003e\u003cstrong\u003eNote: This is a brake like kit intended for your OEM calipers, not Alcon big brake kits that come with their own brake lines.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEach kit features a high-grade hose with a PTFE core protected by a stainless steel outer braid. This construction prevents pedal softness under demanding conditions, enhancing braking performance and clutch responsiveness while offering excellent abrasion and corrosion resistance. These kits deliver the reliability and safety required, along with an attractive finish that elevates the look of any installation. \u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKeywords:\u003c\/strong\u003e stainless steel brake lines, performance brake upgrade, DOT approved brake hoses, Goodridge brake kit, 99-07 Audi TT SS brake lines, 99-07 Audi TT SS performance parts","brand":"Goodridge","offers":[{"title":"Default Title","offer_id":48894275223860,"sku":"GRI30076","price":260.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/fb122d61913969ca002755c7030ae5bf_dd48e543-a5c3-4c56-a449-94f84feb9d5b.jpg?v=1757876408"},{"product_id":"goodridge-08-13-audi-tt-quattro-tt-quattro-only-ss-brake-lines","title":"Goodridge 08-13 Audi TT Quattro (TT Quattro ONLY) SS Brake Lines","description":"\u003cp\u003eGoodridge stainless steel brake line kit for the 08-13 Audi TT Quattro (TT Quattro ONLY) SS stainless steel brake and clutch hose kits are designed to fit your OEM Caliper perfectly.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(175, 2, 2);\"\u003e\u003cem\u003e\u003cstrong\u003eNote: This is a brake like kit intended for your OEM calipers, not Alcon big brake kits that come with their own brake lines.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEach kit features a high-grade hose with a PTFE core protected by a stainless steel outer braid. This construction prevents pedal softness under demanding conditions, enhancing braking performance and clutch responsiveness while offering excellent abrasion and corrosion resistance. These kits deliver the reliability and safety required, along with an attractive finish that elevates the look of any installation. \u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKeywords:\u003c\/strong\u003e stainless steel brake lines, performance brake upgrade, DOT approved brake hoses, Goodridge brake kit, 08-13 Audi TT Quattro (TT Quattro ONLY) SS brake lines, 08-13 Audi TT Quattro (TT Quattro ONLY) SS performance parts","brand":"Goodridge","offers":[{"title":"Default Title","offer_id":48894275289396,"sku":"GRI30079","price":311.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/fb122d61913969ca002755c7030ae5bf_4e94a76a-a4ac-4bd0-8251-4db70e819251.jpg?v=1757876410"},{"product_id":"ebc-2016-audi-q7-3-0l-supercharged-yellowstuff-front-brake-pads","title":"EBC 2016+ Audi Q7 3.0L Supercharged Yellowstuff Front Brake Pads","description":"\u003cp\u003e\u003cstrong\u003eYellowStuff Brake Pads\u003c\/strong\u003e use a high-friction aramid performance compound engineered for Audi. This is a compound we recommend for aggressive street driving and light track-style heat events—with stable pedal feel and consistent response when braking loads rise.\u003c\/p\u003e\u003cp\u003eModern performance platforms can overwhelm factory pads during repeated hard stops—thermal stability matters. Compared with many factory pad formulations, this compound typically delivers higher friction levels and improved fade resistance when installed correctly and bedded-in properly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased braking torque vs typical OEM pads\u003c\/li\u003e\n\u003cli\u003eStable friction characteristics across a broad temperature range\u003c\/li\u003e\n\u003cli\u003eImproved resistance to fade under repeated braking\u003c\/li\u003e\n\u003cli\u003ePredictable pedal feel with progressive modulation\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and performance replacement rotors\u003c\/li\u003e\n\u003cli\u003eBedding-in required to establish a consistent transfer layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBest high-performance street\/spirited-driving pad for Audi models that see repeated hard braking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these better than factory brake pads?\u003c\/strong\u003e\u003cbr\u003eIn most applications, yes. Expect stronger bite and improved fade resistance, especially during repeated stops. Final results depend on rotor condition and proper bedding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to bed these pads in?\u003c\/strong\u003e\u003cbr\u003eYes. Bedding is critical to build a stable transfer layer on the rotor and to achieve the friction and consistency the compound is designed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they make noise or dust?\u003c\/strong\u003e\u003cbr\u003eAll performance pads can produce some noise and dust depending on the vehicle and installation. Correct bedding and clean hardware help minimize both.\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eEBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":48912062415156,"sku":"EBCDP42279R","price":262.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/87bbe4858f9fdde9a68744b378b6e0e6L.jpg?v=1759766733"},{"product_id":"ebc-09-11-audi-a4-2-0-turbo-redstuff-front-brake-pads","title":"EBC 09-11 Audi A4 2.0 Turbo Redstuff Front Brake Pads","description":"\u003cp\u003e\u003cstrong\u003eRedStuff Brake Pads\u003c\/strong\u003e use a street-focused ceramic performance compound engineered for Audi. This is a compound we recommend for daily driving with a noticeable increase in bite and pedal response—with stable pedal feel and consistent response when braking loads rise.\u003c\/p\u003e\u003cp\u003eModern performance platforms can overwhelm factory pads during repeated hard stops—thermal stability matters. Compared with many factory pad formulations, this compound typically delivers higher friction levels and improved fade resistance when installed correctly and bedded-in properly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased braking torque vs typical OEM pads\u003c\/li\u003e\n\u003cli\u003eStable friction characteristics across a broad temperature range\u003c\/li\u003e\n\u003cli\u003eImproved resistance to fade under repeated braking\u003c\/li\u003e\n\u003cli\u003ePredictable pedal feel with progressive modulation\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and performance replacement rotors\u003c\/li\u003e\n\u003cli\u003eBedding-in recommended for best feel and consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBest high-performance street\/spirited-driving pad for Audi models that see repeated hard braking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these better than factory brake pads?\u003c\/strong\u003e\u003cbr\u003eIn most applications, yes. Expect stronger bite and improved fade resistance, especially during repeated stops. Final results depend on rotor condition and proper bedding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to bed these pads in?\u003c\/strong\u003e\u003cbr\u003eYes. Bedding is critical to build a stable transfer layer on the rotor and to achieve the friction and consistency the compound is designed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they make noise or dust?\u003c\/strong\u003e\u003cbr\u003eAll performance pads can produce some noise and dust depending on the vehicle and installation. Correct bedding and clean hardware help minimize both.\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eThere are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car\/sedan\/sport compact\/hot hatch 13 metres quicker than OEM pads from 100mph\/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":48912195977524,"sku":"EBCDP31986C","price":223.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/2b88859fe1d375f2e5a419ab289d0c69L_6378f2c5-b3aa-4239-bc23-d975712e2e78.jpg?v=1759781925"},{"product_id":"ebc-2014-audi-a3-1-8-turbo-w-electronic-parking-brake-redstuff-rear-brake-pads","title":"EBC 2014+ Audi A3 1.8 Turbo (w\/Electronic Parking Brake) Redstuff Rear Brake Pads","description":"\u003cp\u003e\u003cstrong\u003eRedStuff Brake Pads\u003c\/strong\u003e use a street-focused ceramic performance compound engineered for Audi. This is a compound we recommend for daily driving with a noticeable increase in bite and pedal response—with stable pedal feel and consistent response when braking loads rise.\u003c\/p\u003e\u003cp\u003eModern performance platforms can overwhelm factory pads during repeated hard stops—thermal stability matters. Compared with many factory pad formulations, this compound typically delivers higher friction levels and improved fade resistance when installed correctly and bedded-in properly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased braking torque vs typical OEM pads\u003c\/li\u003e\n\u003cli\u003eStable friction characteristics across a broad temperature range\u003c\/li\u003e\n\u003cli\u003eImproved resistance to fade under repeated braking\u003c\/li\u003e\n\u003cli\u003ePredictable pedal feel with progressive modulation\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and performance replacement rotors\u003c\/li\u003e\n\u003cli\u003eBedding-in recommended for best feel and consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBest high-performance street\/spirited-driving pad for Audi models that see repeated hard braking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these better than factory brake pads?\u003c\/strong\u003e\u003cbr\u003eIn most applications, yes. Expect stronger bite and improved fade resistance, especially during repeated stops. Final results depend on rotor condition and proper bedding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to bed these pads in?\u003c\/strong\u003e\u003cbr\u003eYes. Bedding is critical to build a stable transfer layer on the rotor and to achieve the friction and consistency the compound is designed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they make noise or dust?\u003c\/strong\u003e\u003cbr\u003eAll performance pads can produce some noise and dust depending on the vehicle and installation. Correct bedding and clean hardware help minimize both.\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eThere are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car\/sedan\/sport compact\/hot hatch 13 metres quicker than OEM pads from 100mph\/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":48912196469044,"sku":"EBCDP32153C","price":130.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/1926cc83a637330ca2ffb18e447d920f_1ce06874-9970-49ff-96c7-8e13bedd1115.jpg?v=1759781932"},{"product_id":"ebc-11-12-audi-a8-quattro-3-0-supercharged-yellowstuff-front-brake-pads","title":"EBC 11-12 Audi A8 Quattro 3.0 Supercharged Yellowstuff Front Brake Pads","description":"\u003cp\u003e\u003cstrong\u003eYellowStuff Brake Pads\u003c\/strong\u003e use a high-friction aramid performance compound engineered for Audi. This is a compound we recommend for aggressive street driving and light track-style heat events—with stable pedal feel and consistent response when braking loads rise.\u003c\/p\u003e\u003cp\u003eModern performance platforms can overwhelm factory pads during repeated hard stops—thermal stability matters. Compared with many factory pad formulations, this compound typically delivers higher friction levels and improved fade resistance when installed correctly and bedded-in properly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased braking torque vs typical OEM pads\u003c\/li\u003e\n\u003cli\u003eStable friction characteristics across a broad temperature range\u003c\/li\u003e\n\u003cli\u003eImproved resistance to fade under repeated braking\u003c\/li\u003e\n\u003cli\u003ePredictable pedal feel with progressive modulation\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and performance replacement rotors\u003c\/li\u003e\n\u003cli\u003eBedding-in required to establish a consistent transfer layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBest high-performance street\/spirited-driving pad for Audi models that see repeated hard braking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these better than factory brake pads?\u003c\/strong\u003e\u003cbr\u003eIn most applications, yes. Expect stronger bite and improved fade resistance, especially during repeated stops. Final results depend on rotor condition and proper bedding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to bed these pads in?\u003c\/strong\u003e\u003cbr\u003eYes. Bedding is critical to build a stable transfer layer on the rotor and to achieve the friction and consistency the compound is designed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they make noise or dust?\u003c\/strong\u003e\u003cbr\u003eAll performance pads can produce some noise and dust depending on the vehicle and installation. Correct bedding and clean hardware help minimize both.\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cp\u003eEBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":48912198205748,"sku":"EBCDP42087R","price":302.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/56f004f8ba5496a400d7d01d75f3e04fL_9189161a-99b2-4152-9b89-49f76f2117a5.jpg?v=1759781951"},{"product_id":"ebc-11-audi-a6-2-0-turbo-redstuff-rear-brake-pads","title":"EBC 11 Audi A6 2.0 Turbo Redstuff Rear Brake Pads","description":"\u003cp\u003e\u003cstrong\u003eRedStuff Brake Pads\u003c\/strong\u003e use a street-focused ceramic performance compound engineered for Audi. This is a compound we recommend for daily driving with a noticeable increase in bite and pedal response—with stable pedal feel and consistent response when braking loads rise.\u003c\/p\u003e\u003cp\u003eModern performance platforms can overwhelm factory pads during repeated hard stops—thermal stability matters. Compared with many factory pad formulations, this compound typically delivers higher friction levels and improved fade resistance when installed correctly and bedded-in properly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased braking torque vs typical OEM pads\u003c\/li\u003e\n\u003cli\u003eStable friction characteristics across a broad temperature range\u003c\/li\u003e\n\u003cli\u003eImproved resistance to fade under repeated braking\u003c\/li\u003e\n\u003cli\u003ePredictable pedal feel with progressive modulation\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and performance replacement rotors\u003c\/li\u003e\n\u003cli\u003eBedding-in recommended for best feel and consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBest high-performance street\/spirited-driving pad for Audi models that see repeated hard braking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these better than factory brake pads?\u003c\/strong\u003e\u003cbr\u003eIn most applications, yes. Expect stronger bite and improved fade resistance, especially during repeated stops. Final results depend on rotor condition and proper bedding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to bed these pads in?\u003c\/strong\u003e\u003cbr\u003eYes. Bedding is critical to build a stable transfer layer on the rotor and to achieve the friction and consistency the compound is designed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they make noise or dust?\u003c\/strong\u003e\u003cbr\u003eAll performance pads can produce some noise and dust depending on the vehicle and installation. Correct bedding and clean hardware help minimize both.\u003c\/p\u003e\n\u003c!-- Fitment table preserved below --\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003ePremium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eCompetition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2015,2017-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003ePremium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003ePrestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eTDI Premium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eTDI Prestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2013\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003eCompetition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003ePrestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003eTDI Premium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003eTDI Prestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2015\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA8 Quattro\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA8 Quattro\u003c\/td\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA8 Quattro\u003c\/td\u003e\n\u003ctd\u003eL Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA8 Quattro\u003c\/td\u003e\n\u003ctd\u003eL TDI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA8 Quattro\u003c\/td\u003e\n\u003ctd\u003eL W12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2015\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS5\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS5\u003c\/td\u003e\n\u003ctd\u003eCabriolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS7\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2017\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS7\u003c\/td\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2015\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS6\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS6\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS6\u003c\/td\u003e\n\u003ctd\u003ePrestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS7\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS7\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS7\u003c\/td\u003e\n\u003ctd\u003ePrestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS8\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS8\u003c\/td\u003e\n\u003ctd\u003ePlus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2023\u003c\/td\u003e\n\u003ctd\u003ePorsche\u003c\/td\u003e\n\u003ctd\u003eMacan\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2018,2020-2022\u003c\/td\u003e\n\u003ctd\u003ePorsche\u003c\/td\u003e\n\u003ctd\u003eMacan\u003c\/td\u003e\n\u003ctd\u003eGTS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2022\u003c\/td\u003e\n\u003ctd\u003ePorsche\u003c\/td\u003e\n\u003ctd\u003eMacan\u003c\/td\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003ePorsche\u003c\/td\u003e\n\u003ctd\u003eMacan\u003c\/td\u003e\n\u003ctd\u003eT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2018,2020-2021\u003c\/td\u003e\n\u003ctd\u003ePorsche\u003c\/td\u003e\n\u003ctd\u003eMacan\u003c\/td\u003e\n\u003ctd\u003eTurbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":48912276422964,"sku":"EBCDP32082C","price":166.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/a5c873272f0c55fa45dbd41ef0bf73a2_06594f02-63e4-45d3-bcb8-02f16bb3d96f.jpg?v=1759791805"},{"product_id":"ebc-11-audi-a6-2-0-turbo-yellowstuff-front-brake-pads","title":"EBC 11 Audi A6 2.0 Turbo Yellowstuff Front Brake Pads","description":"\u003cp\u003e\u003cstrong\u003eYellowStuff Brake Pads\u003c\/strong\u003e use a high-friction aramid performance compound engineered for Audi. This is a compound we recommend for aggressive street driving and light track-style heat events—with stable pedal feel and consistent response when braking loads rise.\u003c\/p\u003e\u003cp\u003eModern performance platforms can overwhelm factory pads during repeated hard stops—thermal stability matters. Compared with many factory pad formulations, this compound typically delivers higher friction levels and improved fade resistance when installed correctly and bedded-in properly.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased braking torque vs typical OEM pads\u003c\/li\u003e\n\u003cli\u003eStable friction characteristics across a broad temperature range\u003c\/li\u003e\n\u003cli\u003eImproved resistance to fade under repeated braking\u003c\/li\u003e\n\u003cli\u003ePredictable pedal feel with progressive modulation\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and performance replacement rotors\u003c\/li\u003e\n\u003cli\u003eBedding-in required to establish a consistent transfer layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBest high-performance street\/spirited-driving pad for Audi models that see repeated hard braking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eCommon Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these better than factory brake pads?\u003c\/strong\u003e\u003cbr\u003eIn most applications, yes. Expect stronger bite and improved fade resistance, especially during repeated stops. Final results depend on rotor condition and proper bedding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to bed these pads in?\u003c\/strong\u003e\u003cbr\u003eYes. Bedding is critical to build a stable transfer layer on the rotor and to achieve the friction and consistency the compound is designed for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they make noise or dust?\u003c\/strong\u003e\u003cbr\u003eAll performance pads can produce some noise and dust depending on the vehicle and installation. Correct bedding and clean hardware help minimize both.\u003c\/p\u003e\n\u003c!-- Fitment table preserved below --\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003ePremium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eCompetition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2015,2017-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003ePremium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003ePrestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eTDI Premium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6 Quattro\u003c\/td\u003e\n\u003ctd\u003eTDI Prestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003eCompetition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003ePrestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003eTDI Premium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7 Quattro\u003c\/td\u003e\n\u003ctd\u003eTDI Prestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ5\u003c\/td\u003e\n\u003ctd\u003eHybrid Prestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ5\u003c\/td\u003e\n\u003ctd\u003ePremium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ5\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2018\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ5\u003c\/td\u003e\n\u003ctd\u003ePrestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ5\u003c\/td\u003e\n\u003ctd\u003eTDI Premium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ5\u003c\/td\u003e\n\u003ctd\u003eTDI Premium Plus S-Line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ5\u003c\/td\u003e\n\u003ctd\u003eTDI Prestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ5\u003c\/td\u003e\n\u003ctd\u003eTDI Prestige S-Line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2013,2017\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS5\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2013\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS5\u003c\/td\u003e\n\u003ctd\u003eCabriolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS5\u003c\/td\u003e\n\u003ctd\u003ePremium Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2016\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS5\u003c\/td\u003e\n\u003ctd\u003ePrestige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":48912277995828,"sku":"EBCDP42022R","price":289.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/files\/08e1dc3759a8ab20264f6645a83df6acL_1f078264-fc9c-4473-9e99-e2647c4ccdbb.jpg?v=1759791823"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8534\/7636\/collections\/AudiLogo.png?v=1705173759","url":"https:\/\/alconkits.com\/collections\/audi.oembed?page=4","provider":"Alcon Brake Kits","version":"1.0","type":"link"}