ICON 10-14 Ford Raptor Rear 3.0 Zeta Series Shocks PB - Pair| 95200

Product Description

If you’re driving a 2010-2014 Ford F-150 SVT Raptor and you want the rear suspension to live up to the performance of the front, the ICON Vehicle Dynamics PN 95200 delivers a technically advanced upgrade. These aren’t your average drop-in shocks—they’re a full-blown race-derived bypass system engineered for high-speed desert runs, heavy loads, and refined street behavior.

Why you should buy

• True 3.0″ diameter body with external piggyback reservoir: These shocks feature a full 3.0″ tube (inside and out) and a remote reservoir to vastly increase oil/hydraulic capacity and enhance cooling and damping consistency under sustained use. 

• 3-Tube external bypass design with 28-position adjustment: This design gives you fine-grained control over compression and rebound throughout the travel range. With 28 different detented settings, you can tune for plush street ride, firm towing, or aggressive off-road use. 

• Race-level valving and replaceable bypass tubes: Each bypass valve is ported differently and has a specific spring-rate for optimal performance at different travel zones; the bypass tubes themselves are replaceable if damaged — not the entire shock body. 

• Direct bolt-in for compatible lift range (0-1″ rear lift): Designed for the 2010-14 Raptor with stock or mild rear lift (0-1″) so geometry stays correct. 

• Built for durability and serviceability: Rebuildable and re-valveable, with premium components to handle serious use. 

What you’ll feel driving

• Ultra-controlled rear axle movement: When you’re hitting high-speed whoops, jumps, or trail chatter, the rear end will stay more composed. Less uncontrolled bounce, fewer harsh bottom-outs, and the car stays flat.

• Tuned adjustability for your driving style: Want firm and composed for towing and highway? Dial it in. Want plush for daily driving with some off-road sprawl? Dial it back. The 28-position knobs let you tailor the ride.

• Improved ride quality with serious capability: You’ll feel the difference whether you’re running pavement or blasting across desert terrain — the shocks are built to do both.

• Reduced fade under repeated-use: The large body, external reservoir, and enhanced valving mean heat build-up is mitigated and performance remains stable under hard use.

• Confidence when hauling or loading: Even when the load in the bed shifts or the terrain gets rough, the rear has tuned dampers to control motion and maintain stability.

Technical Highlights

• Series: 3.0 Zeta Piggyback Reservoir 3-Tube Bypass Rear Shock Set (PN 95200) 

• External reservoir for increased oil capacity and heat dissipation.

• 28-position detented knobs for adjustability (compression/rebound) requiring no tools. 

• Bypass tubes are replaceable, lowering long-term maintenance cost. 

• Designed for 2010-14 Raptor rear application; true 3.0″ diameter body. 

• Rebuildable design: service kits and rebuild components available. 

Fitment & Other Notes

• Application: 2010-2014 Ford F-150 SVT Raptor (4WD) – rear position. 

• Rear lift compatibility: Designed for 0-1″ of rear lift over stock. 

• Installation: May require specialist tools and alignment post-installation. Refer to ICON instructions. 

• Note: Because these are high-end bypass shocks, tire clearance, bed loads, and geometry should be checked after installation to ensure optimal performance.

• Ideal if you have upgraded the front suspension or are planning serious off-road use — these rear shocks help balance the vehicle’s dynamics and support the front end’s capabilities.

Summary

For a truly performance-oriented upgrade to your 2010-14 F-150 Raptor’s rear suspension, the ICON PN 95200 is a standout. It brings race-derived bypass technology, full adjustability, premium materials, and serious serviceability. If you demand more than stock dampers — if you’re hauling, towing, off-roading, or just want the best of both worlds (street comfort + off-road capability) — this is a solution engineered for you.

Would you like me to pull up detailed travel specs, dimensions, and rebuild kit part numbers for the 95200?

This Part Fits: