Tools and Supplies

This carefully-designed synthetic compound, consisting of glycol ethers, alkyl polyglycols and esters, promises superior performance in any envi...

Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594...

ATE TYP 200 Racing High Performance Brake Fluid is designed to excel within the extreme demands made on a race vehicle and exceeds all DOT4 standar...

Exceptionally high dry boiling point of 590ºF (Wet 518ºF). Superior anti-vapor lock properties. Safe for all non-mineral oil-based disc and drum b...

One of the biggest challenges developing a brake fluid is to reach a boiling point as high as possible. PAGID Racing Brake Fluid has been specially...

COMPATIBILITY: Compatible with all Brembo Racing Brake Systems. *Mixes safely with other DOT3, DOT4, and DOT 5.1 fluids *For best performance, LCF ...

COMPATIBILITY: Compatible with all Brembo Racing Brake Systems. *For best performance, HTC64T should be the only brake fluid in the hydraulic syste...

Brake fluid absorbs moisture over time, lowering its peak temperature capacity before boiling the fluid, creating gas bubbles, a soft pedal, or une...

Make bleeding brakes clean and easy with the bleeder bottles. Make bleeding brakes clean and easy with the cable hung bleeder bottle. Feature no ...

This kit helps you check your brake system and identify any leads.  Provides pressure readings so you can check for leakdown over time. This vac...

  Utilize soft grip pliers to safely and effectively remove stubborn brake pistons. An excellent lower-cost alternative for occasional home use whe...

Conveniently bleed and flush your entire brake system with this Vacuum Brake Fluid Bleeder. Works on two bleeder screws at once so you can bleed an...

These sturdy caliper hanger brackets help with caliper replacements. Don't hang your caliper off the brake hose or search for a coathanger to get...

Piston Removal Tool. Safely remove pistons without air or grease. (Specify Size) 24.5mm - 47.6mmThese Piston Removal Wrenchs are made from 6061-T...

Rotor surface conditioning kit to remove improper brake pad deposition and cure brake shudder most commonly interpreted as warped rotors. This it...

When installing new brake pads we recommend this tool to push the pistons back in to the calipers. Using pliers or channel locks can damage piston...

Lubricates Seals, O-Rings and Valves Great for Brake Caliper and Master Cylinder Piston Seals. BRE-04295410 BRE04.2954.10Brembo Caliper grease is...

GT-R Titanium Pad Shims Fits 2008+ Nissan GTR with OEM Brembo calipers Great heat management upgrade to improve braking performance for track and r...

Tesla Titanium Pad Shims Fits: 2017+ Tesla Model 3 AWD Performance (w/ Red Brembo) 2020 Tesla Model Y AWD Long Range (w/ Grey Brembo) 2020 Tesla M...

Alcon CAR89 / Brabus Titanium Pad Heat Shields Upgrade your braking performance for track and race applications with the CAR89 Titanium Pad Shims f...

"Wide Range" temp strip Kit Consists of 10 Temp Indicator Strips with a temperature range of 250F to 536F. These "wide band" temp strips cover a r...

Caliper Temperature Indicator Strips Caliper Temperature Indicator Strip is an accurate and easy solution for recording peak temperature of brake c...

Displays temperature range from 600F-1400F / 300C-800C degrees. Often used on transmissions and brake rotors. **Paints can not be shipped by USPS...

Single brake cooling air duct designed to be mounted on bumper for forced air cooling. 3.0" inlet hose attached via clamp. Significant temp drop i...

Dual brake cooling air duct designed to be mounted on bumper for forced air cooling. 3.0" inlet hose attached via clamp. Significant temp drop in ...

+ Developed for High Performance Street use.   STREET+ brake pads by PAGID Racing feature all around performance characteristics for street cars...

One of the biggest challenges developing a brake fluid is to reach a boiling point as high as possible. PAGID Racing Brake Fluid has been specially...