Skip to content

Install Tips

RSS
  • Bobbin Installation Instructions
    December 6, 2023

    Bobbin Installation Instructions

    Read these instructions completely before assembly. Installation and assembly of any brake component should only be performed by qualified professionals or with experience in the installation and assembly process of automotive components. These components will not function as intended if...

    Read now
  • STaSIS Assembly Instructions for Rotor Hats
    October 9, 2023

    STaSIS Assembly Instructions for Rotor Hats

    All information contained in this article are the property of STaSIS engineering and are provided as a courtesy to AlconKits customers.  If you do not feel comfortable with these instructions we would encourage you to contact one of our service...

    Read now
  • ADD Tie Rod Kit installation instructions
    October 9, 2023

    ADD Tie Rod Kit installation instructions

    Ford F150 Raptor Series Tie Rod Conversion Kit Installation Instructions These instructions are provided as a courtesy for customers installing the ADD Tie Rod kit along with our ALcon Big Brake Kit for Ford Raptor and F150   You can...

    Read now
  • How to bed in your brake rotors
    October 9, 2023

    How to bed in your brake rotors

    The objective of pre-bedding the pad is to take the pad through a heat cycle during which the resins contained within the pad are cured, additionally, any high spots on the surface of the pad are removed. After the discs have been bedded and allowed to cool, the disc and pads can be bolted on to the car and should be ready for competition use providing that the discs and pads are “run-in” correctly.
    Read now