ICON 2022-2025 Toyota Tundra 2.5 EXP Front Coilover Shock| 58671

Product Description

If you’re driving a 2022-25 Toyota Tundra or 2023-25 Toyota Sequoia and you’re ready to take your front suspension performance seriously, the ICON Vehicle Dynamics 2.5 EXP Front Coil-over Kit (Part No. 58671) is engineered to deliver. This kit bridges the gap between simple spacer lifts and full threaded bodies, giving you premium shock performance, adjustable ride height, and vehicle-specific tuning—all without completely replacing the factory coil springs.

Technical Highlights & Benefits

• 2.5″ diameter aluminum shock body: The large body size increases oil volume and improves heat dissipation compared to smaller OE units. 

• 7/8″ induction-hardened, chrome-plated shaft: Gives structural strength and durability under heavy loads, extended travel, and harsh terrain. 

• Hard-anodized, impact-extruded aluminum cylinder with CNC-machined 6061 spring seats: Offers high corrosion resistance, clean finish, and high-precision assembly for consistent behavior. 

• Adjustable height from 0″ to ~3″ lift using snap-ring grooves: Allows you to dial in front ride height and geometry while retaining factory coils and mounting hardware. 

• Fully rebuildable and tunable design: The EXP series retains a premium serviceable structure—giving long-term value and tunability. 

• Vehicle-specific valving and architecture: Tuned for the Tundra/Sequoia platform in conjunction with the factory coil springs for optimized damping, control and ride quality. 

Why You Should Buy It

• Better ride quality and control: Compared to stock struts or spacer lifts, this kit gives you more refined damping, reduced harshness, better compliance over uneven terrain, and more control when steering, braking or taking corners.

• Improved front suspension behavior: With the large body size and tuned valving, you’ll have a suspension that handles load changes, bigger tires (up to 35″×12.50″ recommended), and rough-road or off-road use more confidently. 

• Flexibility without full coil-over complexity: If you want adjustable ride height but don’t want to change springs, this kit re-uses your factory front coils while delivering significant performance gains.

• Durability and service worthiness: With rebuildability, CNC-machining, and high-grade materials, you’re buying into a component designed for demanding use—not just a cosmetic lift.

• Optimized for your platform: Since it’s made specifically for the 22-25 Tundra / 23-25 Sequoia front end, you benefit from engineering tuned to your vehicle, rather than a one-size-fits-all approach.

Ideal Use Cases

• You drive a 2022-25 Tundra or 2023-25 Sequoia and want to upgrade front suspension performance without replacing the springs.

• You’re running heavier tires/wheels, using your truck for mixed on- and off-road use, or hauling gear and you want better front-end dynamics.

• You want to adjust ride height (within 0-3″) to fit your stance and tire choice while retaining ride comfort.

• You value engineering, durability and upgrading from a generic lift to a tuned, performance-oriented solution.

Installation & Considerations

• The kit is designed to re-use factory coil springs and upper mounts, but installation still requires proper procedure including spring compressors and full torqueing of hardware. 

• Lift heights above ~2.25″ may require additional components (e.g., sway bar drop bracket) to maintain proper geometry and prevent unwanted effects. 

• Because this is a front-end upgrade, you should ensure the rear suspension and alignment are adjusted accordingly for the best overall behavior.

• The ride height you achieve may vary based on vehicle load, accessories, engine configuration, and other factors.

• Although the kit is rebuildable, for warranty and optimal performance you should not release the internal nitrogen charge or attempt to disassemble without proper tools/training. 

If you’re ready to elevate the front-end performance of your Tundra or Sequoia—improving ride refinement, front steering control, and suspension travel—then the ICON 58671 2.5 EXP Coil-over Kit is a technically-oriented upgrade that aligns engineering precision with real-world driving demands.

This Part Fits: