Paragon 2-piece Rotors Front Pair 396mm x 34mm (15.59” x 1.34”) - Nissan GT-R R35 - Larger Rotor

Unleash the full potential of your Nissan GT-R with these Performance OE Replacement Rotors. The larger 396mm x 34mm size ensures maximum braking power for a daring and exhilarating driving experience. Perfect for those who crave speed and thrill!

Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads. Excellent thermal capacity is achieved by maintaining optimal mass in the rotor rings.

Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The fully-floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface.

Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity.
*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.

Due to heavy vehicle weight and absence of effective brake cooling system, cracking on OEM GT-R rotors are common especially in areas around the cross drilled holes. Paragon Performance rotors can be an effective solution to this issue while improving pedal feel and brake modulation.

• Direct bolt-on and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)

• Directional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%

• Fully-floating 2-piece design

• Steel caliper spacers to accommodate increased rotor size (396mm vs. stock size 380mm)

• Minimizing brake fade & judder during extended sessions

• Great upgrade from non-directional, pillar vane OEM rotors

• Rotor to hat mounting system: H-Bobbin (10 bolt)

• Fits OEM R35 wheels

• Weighs 28.5 lbs (12.9 kg)

Includes:

• One pair of Paragon Performance 396mm x 34mm (15.59” x 1.34”) 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)

• Steel caliper spacers

• Detailed installation manual

Applications:

- 2008-2011 GT-R (CBA)

- 2008-2011 GT-R SpecV (CBA)

- 2012+ GT-R R35 (DBA / EBA)

- 2012+ GT-R Black Edition (DBA / EBA)

- 2015-2016 GT-R Nismo

*Does NOT fit 2017+ GT-R Nismo. 17+ GT-R Nismo version available. Inquire for more details.

***Vehicle specific installation guide download (PDF)

Part # (w/ black hard anodized hat): P2R.035.396.340.24150.05.01.01.F

Part # (w/ hard anodized hat): P2R.035.396.340.24150.05.01.02.F

Extra/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our Rotor Assembly Instructions for torque specs and detailed instructions.

Specifications:

Diameter: 396mm (15.59")

Thickness (new): 34mm (1.34")

Thickness (min.): 32mm (1.26")

Type: 2-piece floating

Face Pattern: Slotted

Vented / Solid: Directional ventilated

Number of Vanes: 48

Hat Material: 6061-T6 aluminum

Friction Ring Material: CM-250 high carbon alloy cast iron

Rotor Finish: CBN turned

Weight (per rotor): 28.5 lbs (12.9 kg)

Cross Reference:

OEM Nissan 40206-JF20A / 40206-KJ10A

Brembo 09.A187.13 / 09.B386.13 / 09.B386.23

AP Racing 20.01.20001

EBC SG2F015OS / SG2F002

Girodisc A1-084

Top Secret 15070210TS

Mine's B100925

Diameter:

Caliper type: