Skip to content
BLACK FRIDAY SALE NOV 15-30!! FREE SHIPPING on all Brake Kits (USA) - Open M-F 8-5
BLACK FRIDAY SALE NOV 15-30!! FREE SHIPPING on all Brake Kits (USA) - Open M-F 8-5
Dodge Wins the 2026 NHRA Manufacturer's Cup Behind Matt Hagan's Four Funny Car Victories

Dodge Wins the 2026 NHRA Manufacturer's Cup Behind Matt Hagan's Four Funny Car Victories

Source: PR Newswire / NHRA.com

Dodge claimed the 2026 NHRA Manufacturer's Cup last weekend, its first since 2016, capping a full season of competitive drag racing across four NHRA divisions. The title was built on points earned in Funny Car, Factory Stock Showdown, Super Stock, and Stock class competition over a 20-race national tour.

The heaviest lifting came from Matt Hagan, who put four Funny Car wins together in a Dodge Charger SRT Hellcat to finish as runner-up in the driver championship. Mark Pawuk added crucial points with a Factory Stock Showdown title in the Charger Drag Pak, while Lee Hartman and Jacob Delaune contributed from Super Stock and Stock class. The combined result pushed Dodge past every other manufacturer in the points table, returning the Cup to the brand for the first time in a decade.

The Charger SRT Hellcat nameplate carried the most weight. At the top level of NHRA Funny Car, those cars run upwards of 10,000 horsepower and cover a quarter mile in under four seconds. Everything under the body shell is bespoke racing hardware, but the name on the door connects directly back to the street car. That link is not just marketing — it matters to the people who own Chargers and Challengers and take pride in what the nameplate represents on a racetrack.

If you are running a 2015-2020 Charger or Challenger SRT Hellcat with the factory six-piston Brembo setup, those original rotor rings have done real work by now. The good news is you do not need new calipers or a new hat to get back to fresh, properly functioning hardware. A direct ring replacement is the cleaner, more cost-effective path.

The Paragon Front 15.4" Replacement Rotor Rings for 2015-20 Dodge Charger / Challenger SRT Hellcat are purpose-built for exactly this. At 390mm (15.4 inches) across, they match the OEM diameter precisely and mount directly to your factory hats — no adapters, no guesswork. These are the iron ring only, which means you keep your existing two-piece hat and simply refresh the friction surface with new, unworn Paragon rings.

Beyond the practical side, there is something satisfying about fresh rotor rings behind a Brembo six-piston caliper. The clean, unscored surface, the sharp vane edges, and the precise fit all add up to brakes that look as capable as they actually are. Under hard stops from triple digits, that matters. At $725 for the front pair, it is a focused upgrade that gets the most out of hardware you already own.

See the Paragon Hellcat Front Replacement Rotor Rings at Alconkits

Next article Tanuki Racing S13 Goes Back-to-Back at the 2026 World Time Attack Challenge
Find your ✔Guaranteed Fit