Skip to content
Closed Dec 24-25. FREE SHIPPING on all Brake Kits to the continental US
Closed Dec 24-25. FREE SHIPPING on all Brake Kits to the continental US

Honda S2000 Performance 2 Piece Rotors - (Rear) 282mm x 12mm (11.10" x 0.47")

SKU P2R.017.282.120.18100.07.03.01.R
Original price $700.00 USD - Original price $700.00 USD
Original price
$700.00 USD
$700.00 USD - $700.00 USD
Current price $700.00 USD
Brake Hat Finish: Black Anodized

Stock Level: Good

Est. Ship By: Tuesday, December 24

Est. Delivery: Thursday, December 26 - Monday, December 30

Ask a question

Paragon 2-piece Rotors Rear Pair 282mm x 12mm (11.10” x 0.47”) - Honda S2000

Maximize your on-track performance with Paragon Performance OE Replacement Rotors for your S2000! These 2-piece rotors provide superior braking and cooling efficiency for a faster stops and better braking. With increased thermal capacity, you can trust these rotors to stand up to even the toughest track conditions. Upgrade your Honda S2000 today!

Pair these with some high performance brake pads for the ultimate combo.

Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.

Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.

 

Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity.
*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.

  • Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)

  • Floating 2-piece design

  • Minimizing brake fade & judder during extended sessions

  • Weighs 7.91 lbs (3.59 kg) - save ~2 lbs of unsprung weight vs OEM
  • Rotor to hat mounting system: D-Bobbin (short) - 8 bolt

 

Direct replacement of: OEM Honda part # 42510-S2A-000

 

Application: Honda S2000 AP1, AP2, CR

Includes:

  • One pair of Paragon Performance 282mm x 12mm (11.10” x 0.47”) 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)

  • Detailed installation manual

Part # (w/ black hard anodized hat): P2R.017.282.120.18100.07.03.01.R

Part # (w/ hard anodized hat): P2R.017.282.120.18100.07.03.02.R

Extra/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our Rotor Assembly Instructions for torque specs and detailed instructions.


Specifications:

Diameter: 282mm (11.10")

Thickness (new): 12mm (0.47")

Thickness (min.): 10mm (0.39")

Type: 2-piece floating

Face Pattern: Slotted

Vented / Solid: Solid

Number of Vanes: N/A

Hat Material: 6061-T6 aluminum

Friction Ring Material: CM-250 high carbon alloy cast iron

Rotor Finish: CBN turned

Weight (per rotor): 7.91 lbs (3.59 kg)

Cross Reference:

OEM Honda 42510-S2A-000 / 42510S2A000

Brembo 08.9092.11

EBC GD7089 / D7089 / USR7089

Centric/StopTech 120.40050 / 320.40050

DBA 483 / 4483S

Mugen 43250-XGS-K0S0

Diameter:

Caliper type:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Free Shipping

Free on all brake kits to the continental USA

Official Alcon Distributor

Expert Advice, Products, Support

Text or Call

+1 (630) 360-2548

Chat With Us

Click "Assistance" below during business hours.