Paragon 2-piece Brake Rotors (Front Pair) for Tesla Model S/X

Upgrade your Tesla Model S or Model X with our Performance OE Replacement Rotors. These front pair rotors measure 355mm x 32mm (13.98" x 1.26") and are designed to provide top-notch braking performance. Say goodbye to brake fade and hello to smooth, consistent stopping power. Elevate your driving experience today.

Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.

Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.

Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity.
*Black hard coat and hard coat anodized hats are the same in terms of performance and durability.

• Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)

• Directional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%

• Floating 2-piece design

• Minimizing brake fade & judder during extended sessions

• Weighs 21.1 lbs, save 8.2 lbs of unsprung weight vs. OEM (per rotor)

• Rotor to hat mounting system: D-Bobbin (10 bolt)

Direct replacement of: OEM Tesla part # 1025099-00-B

Applications:

- 2012-2020 Tesla Model S Front (60, 70, 70D AWD, 75D AWD, 85, 85D AWD, P85, P85D AWD, 90D AWD, P90D AWD, 100D AWD, P100D AWD)

- 2015-2020 Tesla Model X Front (75D AWD, 90D AWD, P90D AWD, 100D AWD, P100D AWD)

Includes:

• One pair of Paragon Performance 355mm x 32mm (13.98” x 1.26") 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)

• Detailed installation manual

Part # (w/ black hard anodized hat): P2R.061.355.320.20900.08.01.01.F

Part # (w/ hard anodized hat): P2R.061.355.320.20900.08.01.02.F

Extra/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our Rotor Assembly Instructions for torque specs and detailed instructions.

Specifications:

Diameter: 355mm (13.98")

Thickness (new): 32mm (1.26")

Thickness (min.): 30mm (1.18")

Type: 2-piece floating

Face Pattern: Slotted

Vented / Solid: Directional ventilated

Number of Vanes: 48

Hat Material: 6061-T6 aluminum

Friction Ring Material: CM-250 high carbon alloy cast iron

Rotor Finish: CBN turned

Cross Reference:

OEM Tesla 1025099-00-B

EBC D2141 / SG2FC2141

Centric/StopTech 120.52002

Girodisc A1-173

DBA 42768

Diameter:

Caliper type: