332mm x 28mm Disc for Alcon, REVO, and Paragon BBK
** NOTE *** These items are NOT returnable. Please contact us if you have any questions before ordering.
These discs are direct replacements for your Alcon-Paragon BBK. They will bolt on and are directional so you must order a Left and a Right.We also suggest replacing your brake pads and hardware when buying new rings. Replacing the pads at this times guarantees better rotor life and better break-in than using old pads.
Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.
Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotor rings went through rigorous quality control procedures and inspections to ensure the rotor rings are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our rotors improves overall handling by saving unsprung mass.
-
Directional ventilation vanes for optimal cooling performance and increased resistance to cracking. Run up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%
-
Floating 2-piece design
-
Minimizing brake fade & judder during extended sessions
-
Outside Diameter "A": 332mm
-
Thickness "B": 28mm
-
P.C.D. "M": 203.2mm
-
Number of Mounting: 12
-
Size of Mounting: 6.4mm
-
Type of Mounting: Round
-
Internal Diameter "C": 227mm
-
Inside Flange Diameter "D": 190mm
-
Mtg. Flange Thickness "H": 5.7mm
-
Type of Flange Face: Step Up +0.02mm
-
Max. Pad Depth: 52.5mm
-
Number of Vanes: 48
-
Air Vane Gap: 14.5mm
This part is the Disc ONLY.
Need help installing? See our installation guide here. STaSIS rotor replacement guide.
SKU: PRR.8005.332.2270.280.20320.03.03.L/R
