Paragon 2-piece Brake Rotors (Rear Pair) for Tesla Model S / Model X (2017+ Non-perf)
This is the rotor for cars equipped with Mondo calipers. If you have the Brembo calipers you should order this one.
Upgrade to a luxurious driving experience with our Performance OE Replacement Rotors. Designed specifically for your Tesla Model S and Model X, these 365mm x 28mm (14.37" x 1.10") rotors provide optimal performance and precision. Elevate your ride with the best in class..
Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.
Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.
Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. *Black hard coat and hard coat anodized hats are the same in terms of performance and durability.
Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)
Directional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%
Floating 2-piece design
Minimizing brake fade & judder during extended sessions
Rotor to hat mounting system: D-Bobbin Short (10 bolt)
Direct replacement of: OEM Tesla part # 1027632-00-B
Applications:
- 2017+ Tesla Model S / Model X Non-performance Rear
***Only fits vehicles with Mando single piston sliding rear calipers (integrated parking brake function). Does not fit vehicles with stock Brembo calipers (separate parking brake calipers).
Includes:
One pair of Paragon Performance 365mm x 28mm (14.37” x 1.10") 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)
Detailed installation manual
Part # (w/ black hard anodized hat): P2R.061.365.280.21000.08.01.01.R
Part # (w/ hard anodized hat): P2R.061.365.280.21000.08.01.02.R
Extra/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the aluminum hat properly. Please refer to our Rotor Assembly Instructions for torque specs and detailed instructions.
Specifications:
Diameter: 365mm (14.37")
Thickness (new): 28mm (1.10")
Thickness (min.): 26mm (1.02")
Type: 2-piece floating
Face Pattern: Slotted
Vented / Solid: Directional ventilated
Number of Vanes: 48
Hat Material: 6061-T6 aluminum
Friction Ring Material: CM-250 high carbon alloy cast iron
Quality rotors for my 21 Challenger Scat pack and cheaper than the OEM rotors.
p
parish
Quality
I haven’t installed them as of yet. But my first impression is very good.
E
Eric
Front rotor for my volvo v60 polestarl
Needed a front brake job on my 2015 Polestar. The only place that could sell me the rotor was my local Volvo dealer, for a total of 2200can$ all tx included. Bought Paragon rotor from Alcon Brake for 1500can$ all included. No braokage fee. The quality is superb and the customer service is quick and friendly.
Merci AK!
J
Jeff
Great brake rotors for Porsche Cayman GT4
The Alcon rotors are serviceable, hats are of excellent quality and are at a good price. I recommend them! I have 4 track days on them and they look fine. Sebring International Raceway isn't easy on brakes either.
J
Jeff
Buyer
Called in for tech advice, very helpful and knowledgeable! helped with delivery process good product!
Thank you Jeff - happy we were able to meet your expectations. Tech advise is usually what sets us apart!
Free Shipping
Free on all brake kits to the continental USA
Official Alcon Distributor
Expert Advice, Products, Support
Text or Call
+1 (630) 360-2548
Chat With Us
Click "Assistance" below during business hours.
Frequently asked questions on Alcon Brakes
Why buy from Alconkits.com?
Can I buy Alcon Brakes and parts somewhere else?
Yes, some general automotive retailers and online marketplaces may list Alcon brake kits or individual components. However, Alcon brake systems are engineered, vehicle-specific systems, not commodity parts.
When purchased from Alconkits.com, you are buying directly from a specialist Alcon distributor with deep application knowledge, fitment validation experience, and long-term service support. This ensures you receive the correct configuration, pad compound guidance, wheel-clearance assistance, and ongoing support throughout the life of the brakes.
Why should I buy this kit from Alconkits.com instead of a retailer like eBay or Amazon, or marketplace?
Alconkits.com specializes exclusively in Alcon brake systems. We are not a general parts reseller.
When you buy from Alconkits.com, you get:
Application-specific guidance for heavy trucks like the Ram TRX
Fitment advice on your brakes to ensure they clear your wheels with guaranteed compatibility with your vehicle.
Wheel-fitment and clearance validation support
Pad compound recommendations based on real-world use (street, off-road, towing, track)
Access to replacement pads, rotors, seals, and service parts long after purchase
Lifetime technical support from Alcon brake specialists
Most marketplaces can sell a box. We support the entire brake system lifecycle for as long as you own it.
What makes Alcon big brake kits different from other aftermarket brake options?
Alcon brake kits are engineered systems, not assembled collections of parts.
Each kit is designed with:
Vehicle-specific caliper piston sizing
High-mass rotors for thermal capacity on heavy vehicles
Motorsport-grade materials and manufacturing processes
Compatibility with factory ABS, traction control, and master cylinder
This results in more consistent pedal feel, better heat management, and superior durability compared to budget or generic big brake kits.
Are Alcon brake parts “one-size-fits-all”?
No. Alcon brake kits are application-specific.
Vehicle weight, intended use, rotor size, caliper configuration, and pad compound all matter—especially on high-performance cars and trucks. Selecting the wrong configuration or pad compound can reduce braking performance, increase noise, or accelerate wear.
This is why buying from the specialist distributor, Alconkits.com, matters.
What type of driver is Tesla Model S / Model X (2017+ Non-perf) Performance 2 Piece Rotors - (Rear) 365mm x 28mm (14.37" x 1.10") for?
Manufactured by Paragon Performance, we recommend this as being suitable for the following driving styles:
Street
Sporting
Street/Track
Armored/OffRoad
Track/Race
After purchase support questions.
What happens if I need pads, rotors, or service parts in the future?
This is THE question to ask. Alcon brake systems are fully serviceable.
When you purchase from Alconkits.com, you have long-term access to:
Replacement brake pads
Replacement rotors
Seal kits and service components
Technical guidance for maintenance and service intervals
This is a major advantage over marketplace sellers who may not support the product after the sale. We know what fits, we stock it, and we don't sell you parts you don't need.
Why does this Alcon brake kit cost more than stock brakes or some aftermarket options?
Alcon brake kits are built to deliver higher performance, durability, and consistency than OEM or budget aftermarket brakes.
The cost reflects:
Larger, higher-mass rotors for heat control
Precision-machined multi-piston calipers
Motorsport-grade materials and testing
Long-term serviceability and support
This is not a cosmetic upgrade—it is a functional braking system designed for demanding use.
Is Alconkits.com an authorized Alcon distributor?
Yes. Alconkits.com is an authorized and specialist Alcon distributor with one of the largest Alcon-focused catalogs and knowledge bases available.
Our team has extensive experience supporting Alcon brake systems across trucks, SUVs, performance cars, and specialized applications.
What kind of support is available if I have questions before or after purchase?
Alconkits.com provides lifetime technical support for Alcon brake systems purchased through us.
Our support resources include:
Direct access to Alcon brake experts
Extensive technical articles and guides
Fitment and configuration assistance
Long-term ownership and service support
Brakes are a critical system—our goal is to make sure you get it right.
How do I get support for Alcon Brakes
We make it easy - connect with us the way its convenient for you.
Authorized Paragon Performance Dealer
Factory Warranty
Heat Resistant Product
High Performance Specification
Corrosion Resistance
Street Approved
Sport Driving Use
Dual Purpose Street/Track
Track/Race Approved
Armored, Offroad & Heavy Duty Rated
